Advertisement
Note: Some phones do not connect automatically to the kit after pairing. You
need to press the MFB (1) (1
Or use the menu of your phone:
Go back to Bluetooth > Paired devices > highlight the name of this
headset (ST MOTO) > press Options > then press Connect.
The SUPERTOOTH BTMOTOF4 is now ready to use.
E. BASIC OPERATION:
IMPORTANT:
The SUPERTOOTH BTMOTOF4 needs to be 'paired' with your Bluetooth mobile
phone before you can use the following functions. (See Pairing to your
Bluetooth Mobile Phone on section D.)
Make a Call:
-
Dial the number using your phone. Audio will automatically be on the
headset.
Note: With some phones, audio is always on the phone during an outgoing call.
You will need to press the MFB (1) to transfer the audio to your headset.
Answer a Call:
Assuming the VOX is activated: Accept a call by loudly saying a word within
-
10 seconds. (Example: When you receive the ring tone, Say loudly "Ok!")
The call will be answered. Audio will be on the headset. (See VOX
Activation / Deactivation on section F.)
You also have the option to answer the call normally by pressing the MFB
-
(1) for 1 second (1
End a Call:
Press the MFB (1) for 1 second to end the call (1
-
Reject a Call (For Handsfree Profile Phones only):
Assuming the VOX is activated: Reject a call by being silent for 10 seconds.
-
The call will automatically be rejected. (See VOX Activation / Deactivation
on section F.)
You also have the option to reject the call normally by pressing the MFB (1)
-
for 3 second (2
Voice Dial:
IMPORTANT: First, make sure to activate the voice dial function of your phone.
Record at least one voice tag. (Kindly refer to the procedure in your phone's
manual.)
st
beep) to connect.
st
beep).
nd
beep).
st
beep).
3
Advertisement
