Summary of Contents for Triomed CGI-3
- Page 1 E N E R G Y A N D I N F O R M A T I O N D E V I C E TRIOMED CGI-3 (the manual) Version 1 Introduced on 10 December 2015 TALLINN 2016...
- Page 2 ID-code: No. 12146269 Address: Maealuse 4, EE-12618 Tallinn, Estonia Telephone: +(372)56888978 E-mail: triomed-eu.eu Triomed EU OU (Ltd) does hereby declare that we are solely responsible for the following product: Energy and information device “TRIOMED CGI-3“ (with integrated emitters, options: 40-43 GHz)
- Page 3 Dear Consumer! This manual explains how to use the TRIOMED CGI-3 device at home. 2274 The device is ready for use and can be utilised only for its intended purpose in strict compliance with the operation instructions and safety precautions.
- Page 4 TRIOMED CGI-3 (the manual) The following signs have been used in the manual and for labelling the device: 2274 CE labelling Consult instructions for use Non-ionising electro- magnetic radiation Fragile, handle with care! Caution, consult accompanying Device serial number documents...
- Page 5 TABLE OF CONTENTS INTRODUCTION 1. PURPOSE 2. MECHANISMS OF EFFECTS 3. TECHNICAL AND OPERATIONAL CHARACTERISTICS 3.1. General technical specifications 3.2. Structure and functioning 3.3. Use of the device 4. PACKAGE CONTENTS 5. LABELLING 6. PACKAGING 7. DISPOSAL 8. WARRANTY 9. PREPARING THE DEVICE FOR USE 9.1.
-
Page 6: Introduction
A naturally balanced and harmonious body enjoys much higher vitality, adaptability and survival capacity in our fast-changing world. TRIOMED CGI-3 will help you to maintain this crucial balance! -
Page 7: Purpose
TRIOMED CGI-3 (the manual) 1. PURPOSE TRIOMED CGI-3 device is designed to protect and restore your health by influencing your energy and information system (EIS) and the surround- ing environment with a specially selected wave signal of the Si-Ge crystal. -
Page 8: Mechanisms Of Effects
TRIOMED CGI-3 (the manual) 2. MECHANISMS OF EFFECTS According to Oriental teachings, we are all one unit consisting of two inseparable parts; the physical body and the energy and information sys- tem (EIS). Every process that takes place in the body, in an organ or in a cell, has a double nature: An energy change will lead to changes in the biochemical process as well. - Page 9 EIS system has a beneficial effect on the body. The SI-GE crystal used in the TRIOMED CGI-3 device can work in two modes: In an active mode (when the crystal is adapted and activated by being applied on the body) or in the background mode when there is no direct contact with the body anymore.
- Page 10 TRIOMED CGI-3 (the manual) The BioTrEM technology makes it possible to use the effect of electronic home- opathy and adjust the dis- tortions in the functioning of the energy and information system (EIS) returning it to its harmonious state and...
-
Page 11: General Technical Specifications
7,5 and 6,98 mm). The software allows to generate MM EMR with varying modulation during the session. The device features are: 3 programmers of low-frequency modulation of the MM. The main technical characteristics of the TRIOMED CGI-3 device are given in Table 1 below. Table 1... - Page 12 TRIOMED CGI-3 (the manual) Characteristics Description Automatic shutdown function after the end of the programme Overall dimensions no more than 75×45×13 mm Weight no more than 0.1 kg Mean time between failures no less than 1,500 hours Life cycle of the device...
-
Page 13: Structure And Functioning
TRIOMED CGI-3 (the manual) 3.2. Structure and functioning The device is a monoblock unit. The front panel of the body of the device (Fig. 1) houses the control button and 2 LED indicators. The back panel (Fig. 2) houses two fastening screws and the working surface with the millimetre EMR generator underneath. - Page 14 TRIOMED CGI-3 (the manual) The device is switched on by pressing the control button. While the button is kept pressed, the programmes no.1 and 2 are selected in turn as indicated by the switching on of one or two LEDs for approx. 2 seconds (Fig.
-
Page 15: Use Of The Device
TRIOMED CGI-3 (the manual) 3.3. Use of the device Choose a suitable program (Section 10.1). Find out the LED combi- nation by which it is indicated (Fig. 3 - 5). Switch on the device by press- ing the control button and hold it up to the moment the chosen LED combination will come up. -
Page 16: Package Contents
TRIOMED CGI-3 (the manual) 4. PACKAGE CONTENTS Package contents: • TRIOMED CGI-3 device; • CR2032 battery; • user manual; • consumer packaging; • warranty. 5. LABELLING The marking is shown on the label at the bottom of the device. The label specifies: •... -
Page 17: Packaging
TRIOMED CGI-3 (the manual) • power consumption; • operational symbols; • CE marking; Other important information is provided in the Declaration of Conformity and User manual. 6. PACKAGING The packaging protects the device from weather and mechanical damages. The packaging (box) provides all the required information in English and the language of the seller’s country about the product,... -
Page 18: Preparing The Device For Use
TRIOMED CGI-3 (the manual) 9. PREPARING THE DEVICE FOR USE 9.1. Operating restrictions The device can be used only after reading the User Manual. It is forbidden • to use the device without reading the User Manual; • to use the faulty or damaged device;... -
Page 19: Safety Precautions
TRIOMED CGI-3 (the manual) 9.2. Safety precautions No special safety precautions are required 9.3. Preparing the device for use Before switching on the device, inspect the outside of the device and make sure that the body is not damaged. IT IS FORBIDDEN to use the device with the damaged body! Fig. -
Page 20: List Of Possible Faults And Suggested Remedies
TRIOMED CGI-3 (the manual) The level of the battery charge is indicated by the brightness of the LEDs. The serviceability of the device should be checked before every use. Normal functioning of the device is described in Section 3.2 “Structure and functioning”. -
Page 21: Technical Maintenance
TRIOMED CGI-3 (the manual) The device does not Electric circuit failure Send the device to be exit the selection mode repaired and does not switch off The mute mode cannot Electric circuit failure Send the device to be be selected... -
Page 22: Procedure For Using The Device
TRIOMED CGI-3 (the manual) 10. PROCEDURE FOR USING THE DEVICE This Manual regulates the use of the device. Exposure of the human biological energy to the low intensity radiation of the Si-Ge crystal maintains and strengthens a person`s energy and information system,... -
Page 23: Programme 1. Harmony, 30 Minutes
TRIOMED CGI-3 (the manual) Programme 1. Harmony, 30 minutes (directly on the body or for distant stimulation) The maximum duration of stimulation per each 24-hour period is 2 hours. The programme is designed to stimulate the whole EIS of a person. For that purpose, the device should be worn on a strap or string on the neck or placed at a distance of 50 cm from the body. -
Page 24: Programme 2. Regulatory, 10 Minutes
TRIOMED CGI-3 (the manual) Programme 2. Regulatory, 10 minutes. This programme is designed to work with the main energy centres, channels and problem areas. The programme is indicated to be used in cases of fatigue, increased irritability, overexertion, psycho-emo- tional stress, sleep disorders and mood decline/depression. - Page 25 TRIOMED CGI-3 (the manual) At the same time due to the regulation of energy flows and nodes, human EIS is recovered, the general resistance of the organism to the unfavourable factors increases and a restoration of functional reserves occurs. The regulatory programme allows diagnosing assessments of the human EIS, identifying areas that work with the distortions and by stim- ulating them, bringing the interaction of cells in the body to harmony.
- Page 26 TRIOMED CGI-3 (the manual) woman suf- fered from a fatigue syndrome. The first photo shows a lack of energy in the area of the left kidney and the lungs, as well as reduced adaptation. The diagnostic assessment of the palm identified the problem areas.
-
Page 27: Programme 3. Recovery, 15 Minutes
TRIOMED CGI-3 (the manual) The following days continue the stimulation with the same sequence. The body may respond in the same spot or elsewhere. The body will de- termine the response zone in accordance with its own needs. The pain area can be the same or a new one. -
Page 28: Description Of The Process Of Using The Device
TRIOMED CGI-3 (the manual) 10.1. Description of the process of using the device • Take a comfortable position. • To begin the procedure, select the suitable programme of stimulation and switch on the device by pressing the control button. • When using Programme 1 place the device on the body part with the top panel facing up (the small round dimple on the panel, where the square crystal is visible).
Need help?
Do you have a question about the CGI-3 and is the answer not in the manual?
Questions and answers