GIGA-BYTE TECHNOLOGY i1320 Disassembly Instruction

Hide thumbs

page of 12

/ 12
Bookmarks

Quick Links

Download this manual

技嘉科技股份有限公司

GIGA-BYTE TECHNOLOGY CO,LTD

BAREBONE

組裝作業指導書

Standard Disassembly Procedure

Application: Disassembly Line

Customer:

Model: i1320

Scope:

Version: 1.0

Release date: 2009-11-09

BOM P/N: 9WI1320＊

編寫: Julia Huang

單位主管:

部門主管:

(Editor)

(Parts Chief)

(Manager)

Need help?

Do you have a question about the i1320 and is the answer not in the manual?

Questions and answers

Summary of Contents for GIGA-BYTE TECHNOLOGY i1320

Page 1: Standard Disassembly Procedure
技嘉科技股份有限公司 GIGA-BYTE TECHNOLOGY CO,LTD BAREBONE 組裝作業指導書 Standard Disassembly Procedure Application: Disassembly Line Customer: Model: i1320 Scope: Version: 1.0 Release date: 2009-11-09 BOM P/N: 9WI1320＊編寫: Julia Huang 單位主管: 部門主管: (Editor) (Parts Chief) (Manager)
Page 2 Status Tooling Description Notice Remark Document History Item Revision Description Date Originator WI 初版 2009/11/09 Julia Huang...
Page 3 Status Tooling Description Notice Remark Be caution when Remove KB Screw Driver Remove KB As illustrated remove 1.Remove KB. [ 1-1 ] Remove Battery、Rubber Foot and Cover Docking. [ 1-2 ] Remove KB.
Page 4 Status Tooling Description Notice Remark Remove Key Be caution when Screw Driver Remove Key Parts As illustrated Parts remove 2. Remove Key Parts. [ 2-1 ] Remove 4 screws, Remove Doors. [ 2-2 ] Remove the memory chip from the memory slot Take out the RAM module from the connector.
Page 5 Status Tooling Description Notice Remark Remove Key Be caution when Screw Driver Remove Key Parts As illustrated Parts remove [ 2-3 ] remove 1 screw and two cables then take out WIFI+WIMAX card. [ 2-4 ] remove 2 screws and two cables then take out 3.5G card. 灰-Gray、黑-Black [ 2-5 ] remove 1 screw then take out 3.5G card.
Page 6 Status Tooling Description Notice Remark Be caution when Remove MB Screw Driver Remove MB As illustrated remove 3. Remove MB. [ 3-1 ] Remover 14 screws. [ 3-2 ] Remove Touch button cable and Touch Pad cable.
Page 7 Status Tooling Description Notice Remark Be caution when Remove MB Screw Driver Remove MB As illustrated remove [ 3-3 ] Disconnect BT Module [ 3-4 ] Remove Cables and 6 screws.
Page 8 Status Tooling Description Notice Remark Be caution when Remove MB Screw Driver Remove MB As illustrated remove [ 3-5 ] Remove 2 screws. [ 3-6 ] Remove 4 screws and disconnect the cable.
Page 9 Status Tooling Description Notice Remark Be caution when Remove LCD Screw Driver Remove LCD As illustrated remove 4. Remove LCD. [ 4-1 ] Remove 4 screws. [ 4-2 ] Remove Rubbers and 4 screws, then remove LCD Bezel...
Page 10 Status Tooling Description Notice Remark Be caution when Remove LCD Screw Driver Remove LCD As illustrated remove [ 4-3 ] Remove Hinge Cap. [ 4-4 ] Remove 4 screws. [ 4-5 ] Remove LCD cable.
Page 11 Status Tooling Description Notice Remark Be caution when Remove LCD Screw Driver Remove LCD As illustrated remove [ 4-6 ] Remove Web camera Cable then remove Web camera module. [ 4-7 ] Remove 4 screws.
Page 12 Status Tooling Description Notice Remark Remove Touch Be caution when Screw Driver Remove Touch Button As illustrated Button remove 5. Remove Touch Button. [ 5-1 ] Remove 2 screws. [ 5-2 ] Remove the cable.