Package Contents Tower speaker AC Adapter RCA Cable Remote Control Pedestad User's Guide LINE-IN Cable Screws Features Provides powerful sound to enhance your listening experience Easy to connect to your devices Remote for convenient controlling from a distance Note: The power source must supply 16V DC .
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles,and the point where they exit the tower speaker. Unplug this tower speaker during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the tower speaker been damaged in any way, such as if the power-...
Page 4
Connections POWER/MODE POWER Power On/Off V-/+ MODE(Bluetooth,Usb, FM Radio,AUX In) Display Play/Pause Next Song PRV Song...
Page 5
AUX IN DC IN Use the supplied RCA cable Connect the AC adapter to connet to the audio output to the DC IN jack,then jacks on your device(TV,DVD, plug it into a wall outlet game system,ect.). LINE IN (For TV Sets,DVD, Computer,Mobile Mic SD card port Phone and so on)
Page 6
Installing the pedestal to the Tower Speaker For installing the pedestal to the tower speaker,you may need twist drill,several screws(supplied). 1.Place the pedestad under the tower speaker.Make sure the holes of tower speaker is exact to match the holes of the pedestal. 2.Install the screws on the punched holes already in the tower speaker.
Page 7
Instructions of Remote BT: Bluetooth Control Key POWER:Standby MUTE :Mute Control KEY AUX:AUX In control MP3:USB &SD Control key FM:FM Radio Control CH+:FM Channel Key Play/Pause for Mp3 playing of upward searching Auto memory for FM Radio PRE song Next song CH-:FM Channel Key VOICE:Sound Mode of downward searching...
Troubleshooting Problem Solution Make sure the AC adapter is plugged into a working outlet and firmly connected to the tower speaker. No sound Check the connection of your device to the tower speaker. Check your source device to see if it is Distorted causing the distortion.
floods or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by persons who are not a Gosinggo Authorized Service Facility; (c) consumables such as fuses or batteries;(d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs;(f) costs of...
Page 10
APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD. EXCEPT AS DESCRIBED ABOVE, GOSINGGO SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER...
Page 11
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 12
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Need help?
Do you have a question about the GS-TS001 and is the answer not in the manual?
Questions and answers