Advertisement
Quick Links
Please dispose of packaging for the product in a responsible
manner. It is suitable for recycling. Help to protect the
environment, take the packaging to the local amenity tip and
place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with your
domestic waste. If your supplier offers a disposal facility please
use it or alternatively use a recognised re-cycling agent. This
will allow the recycling of raw materials and help protect the
environment.
FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
Ref: 091116
20
Chargestar T27
12/24v Battery Charger
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.
03982
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SIP Chargestar T27
Summary of Contents for SIP Chargestar T27
- Page 1 This will allow the recycling of raw materials and help protect the environment. FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR SIP DIRECTLY ON: 03982 TEL: 01509500400 EMAIL: sales@sip-group.com or technical@sip-group.com www.sip-group.com...
-
Page 2: Declaration Of Conformity
Low Voltage Directive 2004/108/EC EMC Directive 2011/65/EU RoHS And the relevant standard(s), including: EN 60335-2-29:2004+A2:2010 EN 60335-1:2012+A11:2014 EN 62233:2008 EN 55014-1:2006+A1:2009+A2:2011 EN 55014-2:1997+A1:2001+A2:2008 EN 61000-3-2:2006+A1:2009+A2:2009 EN 61000-3-3:2013 Signed: …………………………………... Mr P. Ippaso - Managing Director - SIP (Industrial Products) Ltd Date: 29/07/2015. - Page 3 NOTES CONTENTS Page No. Description Safety Symbols Used Throughout This Manual Safety Instructions Electrical Connection Guarantee Technical Specifications Getting to Know Your Battery Charger Operating Instructions Troubleshooting Wiring Diagram Exploded Drawing Parts List Declaration of Conformity...
- Page 4 SAFETY SYMBOLS USED THROUGHOUT THIS MANUAL NOTES Danger / Caution: Indicates risk of personal injury and/or the possibility of damage. Warning: Risk of electrical injury or damage! Note: Supplementary information. SAFETY INSTRUCTIONS IMPORTANT: Please read the following instructions carefully, failure to do so could lead to serious personal injury and / or damage to the Battery Charger.
- Page 5 Screw M8 PW02-00180 Spring washer M5 PW02-00198 manual for future reference. SIP recommends that this charger should not be modified or used for any application Bolt (M4 x 16) PW02-00181 Ammeter PW02-00199 other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us and we will be more than happy to advise you.
- Page 6 SAFETY INSTRUCTIONS….cont EXPLODED DRAWING Use recommended parts only - Unapproved parts may be dangerous and will inval- idate the warranty. Do not move or handle the machine when it is running. Do not leave the machine unattended when in use. Switch the machine off and unplug from the mains supply before leaving the work area.
- Page 7 Connecting to the power supply: This SIP battery charger is fitted with a standard UK 230v ~ 13 amp type plug. Before using the battery charger, inspect the mains lead and plug to ensure that neither are damaged. If any damage is visible have the battery charger inspected / repaired by a suitably qualified person.
- Page 8 ELECTRICAL CONNECTION….cont TROUBLESHOOTING The following form lists the common operating issues with problems and solutions. Warning: Never connect any phase wires to the earth terminal of the plug or Please read the form carefully and follow it. board. Only fit an approved plug with the correct rated fuse. If in doubt consult a qualified electrician.
- Page 9 OPERATING INSTRUCTIONS….cont GUARANTEE This SIP Battery Charger is covered by a 12 month parts and labour warranty covering CHARGING A BATTERY ON A VEHICLE failure due to manufacturers defects. This does not cover failure due to misuse or op- erating the battery charger outside the scope of this manual - any claims deemed to...
- Page 10 GETTING TO KNOW YOUR BATTERY CHARGER OPERATING INSTRUCTIONS CHARGING A BATTERY Note: Never exceed the boost charge setting; maximum 1 hour charge, after which if required the battery charger should be switched to normal charge or turned off so it can cool down for a few hours. Failure to adhere to this will void your warranty. Important: The boost charge is not designed to jump start a car, doing so will damage the charger/battery and void any warranty you may have.
Need help?
Do you have a question about the Chargestar T27 and is the answer not in the manual?
Questions and answers