Page 3
(Fig.8) (Fig.7) 5. Insert SO-DIMM module into memory 6. Push down memory module to get it (Fig.7) (Fig.8) slot at a 45-degree angle. hold by 2 fasteners firmly. (Fig.10) (Fig.9) 7. Screw on the fitted HDD with bracket by 4 screws (Attention: please pay attention to (Fig.9) (Fig.10) the direction of HDD;...
Page 4
(Fig.14) (Fig.13) 10. Connect SATA power cable to 11. Connect SATA cable to mainboard. (Fig.13) (Fig.14) mainboard. (Fig.16) (Fig.15) 12. Screw on the HDD Kit device bracket by 2 screws (Fig.15) (Fig.16) (Round Screw Type: M3*5). (Fig.17) (Fig.17) 13. Paste the thermal Pad on HDD.
Page 5
(Fig.19) (Fig.18) 14. Cover the upper cover and screw on back panel and bottom cover by 6 screws (Fig.18) (Fig.19) (Flat Screw Type: M3*6). (Fig.21) (Fig.20) (Fig.20) (Fig.21) 15. Put the 6 foot stands on back panel and bottom cover.
Page 6
BRIK 3.5" HDD Exploded Drawing Dimension: 73(H) x 187(W) x 130(D) mm 1. BRIK,Top Cover, 6. 3.5"HDD 11. Thermal Pad (CUP/NB) 2. BRIK,Chassis, 7. HDD Bracket 12. Thermal Pad (SB) 3. BRIK,Bottom Cover, 8. HDD Kit, 13. Switch 4. Back Panel 9.