True Induction MINI DUO User Manual page 5

II. Cooktop Installation Continued...
Dimensions and Placement for Cut-out in Countertop
This appliance is not user serviceable. Installation must be completed by a qualified
technician.
WARNING!
FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors and liquids in
the vicinity of the unit. To eliminate the risk of burns or fire due to overheating, cabinets located
above the induction cooktop should be avoided or allowed a minimum of 30'' clearance. If cabi-
net space is available, the risk can be reduced by installing a range hood at a minimum of 5
inches below the bottom of the cabinets.
IMPORTANT INSTALLATION INFORMATION:
All electric cooktops run off of a single phase, three-wire cable, 120V/60Hx AC only electrical
supply with ground. The installation should be made using wires, conduits, and fittings size in
accordance with the National Electrical Code– ANSI/NFPA 70.
Cut a rectangle hole in the countertop where the cook top is to be placed. The dimensions

for the cut-out are 13 3/4' x 20''
The cut-out must be placed at least 2 1/2" from any side of the countertop.

To achieve flush mounting installation, use a router tool to round the corners of the hole cut

into the countertop.
DOUBLE BURNER MINI DUO INDUCTION COOKTOP MANUAL
20''
5
P.3