Gator G4 Installation Manual

MOUNTING THE RADIO RECEIVER MODULE
 Always mount the radio receiver module in clear open air.
 Mount the module in the horizontal plain with the window facing downwards as shown in the Figure 1
below.
Figure 1
 Mount the receiver module onto a stainless steel receiver bracket using the modules mounting slot as
shown in figure 2 below. Insert an M5 machined screw through the hole provided in the top of the
modules mounting bracket and lock this in place with a machine nut to secure the module.
Figure 2
 Mount the receiver module along with its bracket on a solid pole or other suitable solid structure as high
is as practically possible. Refer to Figure 3 below as example.
Figure 3
Our policy is one of continue research and development in the quest to improve our products. We therefore reserve the rights to amend information provided in this
For sales or technical support please contact Irri-Gator Products (Pty) Ltd at:
Installation guide for the Gator G4
Radio Receiver Module
document, without notice.
Tel: +27 21 9827561, Fax: +27 21 9814473, E-mail: info@irrigator.co.za
P. O. Box 889, Brackenfell, 7561, Western Cape Province, South Africa