Table of Contents
Advertisement
Quick Links
AUTOMATIC TEMPERATURE CONTROLLER
1. The automatic temperature controller is a sensitive sensor and needs to be taken care of.
It should not be hurtled, bumped and shaken hard.
2. Only our controller attached to the skillet can be used, any others are not advised.
3. Input the controller straight, when pulling it, hold the plug and do not draw the wire sharply.
Take good care of the direction when you plug it in or out.
4. Keep the socket of temperature tester clean.
5. If the tester is damaged or too hot, turn the appliance OFF at once. Call your service
provider for immediate assistance.
6. The temperature graduated disc should be position "OFF" when you either input or output
the temperature controller. Otherwise, it would be damaged or heated too much.
ELECTRICAL REQUIREMENTS
Voltage: 120V
Hertz: 60Hz
Power: 1400W
7
ovente.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ovente SK10112 Series
Summary of Contents for Ovente SK10112 Series
-
Page 1: Electrical Requirements
6. The temperature graduated disc should be position “OFF” when you either input or output the temperature controller. Otherwise, it would be damaged or heated too much. ELECTRICAL REQUIREMENTS Voltage: 120V Hertz: 60Hz Power: 1400W ovente.com... - Page 2 12 Inch Electric Portable Skillet with Glass Tempered Cover SK10112 Series Before using please read the instruction manual and keep it for future use. ovente.com...
- Page 4 Do not use the pan under if: -The work plate is not steady or on easy burning surfaces such as newspapers, PVC table and floor, etc. -The heating plate should be far away from the wall, furnish, PVC desk and floor etc at least 6in. ovente.com...
- Page 5 After the heating plate is cooled, wipe it with a clean sponge (sponge is not included). When doing this, cover the socket hole to avoid the water from penetrating to it. 5. Wipe the washed pan with a rag. ovente.com...
-
Page 6: Important Safeguards
Do not handle the skillet with wet or moist hands. Should the skillet become wet or moist, remove the main plug from the socket immediately. Use the skillet only for its intended purpose. If the supply cord is damaged, do not use the skillet and contact your service provider. ovente.com... - Page 7 Adjust the temperature controller before inputting the plug; when finished, turn the controller to OFF and then unplug. Do not use lotion, nylon brush and metal brush on the skillet. ELECTRIC SKILLET PARTS Handle Stand 2. Glass Cover Shell 3. Heating Plate Box of Temperature Controller ovente.com...
-
Page 8: Temperature Controller
If the controller is not properly inserted, the appliance will be heated abnormally and can thus easily damage the pan or cause accidents. So inserting the controller correctly is very important. Adjust the temperature graduated disc according to the different cooking needs. ovente.com...
Need help?
Do you have a question about the SK10112 Series and is the answer not in the manual?
Questions and answers
When you start what temperature should you use
After turning the Ovente SK10112 Series skillet ON, wait for 5-10 minutes before starting to use it. The specific starting temperature is not mentioned in the provided information.
This answer is automatically generated