Summary of Contents for Beacon iB003N
- Page 1 Ankhmaway BEACON SIMPLIFY YOUR LIFE iB003-N User Guide v1.0 Ankhmaway Beacon iB003N Fully-Functional Indoor Locating Beacon. User Guide v1.0...
- Page 2 SIMPLIFY YOUR LIFE iB003N User Guide v1.0 Eddystone and formal BLE 4.0 protocol (or Features latter). iB003N can be used to broadcast any Support iBeacon features information users need not only iBeacon and Support Eddystone features Eddystone. For example, you can configure the Support BLE4.0 protocol.
- Page 3 Register Beacon State ..............................5 iB003-N works as an iBeacon alone..........................6 Configuration................................... 6 Four ways to get the battery information While Beacon is broadcasting iBeacon Data ..... 6 iBeacon Data Default Setting ..........................6 Adjustable Parameters ............................6 iB003-N works as an Eddystone alone.
- Page 4 Ankhmaway BEACON SIMPLIFY YOUR LIFE iB003N User Guide v1.0 Service 0xFFD0 ................................11 Service 0xAA10 ................................12 Service 0xFF80 ................................12 Service 0x1804 ................................13 Service 0xFF70 ................................13 Service 0xFF60 ................................13 Service 0x1802 ................................14 Service 0x180F ................................14 Service 0xFF50 ................................
-
Page 5: Introduction
3 things at the same time. Product Details Ankhmaway iB003N supports all the service that iB001N and iB004N provide. iB003N supports BLE4.0 protocol, which means users can reconfigure Proximity UUID, Major, Minor, Measured Power Value, Broadcast Rate, Tx Power, Device Name. As for the the service of iB001N and... - Page 6 Eddystone Data can totally be configured which means users can configure the data to whatever they need, or even do not obey the Eddystone protocol. For instance, if users need the Beacon to broadcast Proximity UUID: EBEFD083-70A2-47C8-9837-E7B5634DF524 continuously and it happens when the Beacon is in motion, they can configure the Eddystone’s data to...
-
Page 7: Detect And Inform The Motion
To solve this problem, we use a smart way to activate the iB003-N. Users do not need to connect the Beacon one by one. Only need to simply tap the Beacon, and convert Beacon’s direction according to a fixed way to finish the activation. There are 4 steps to... -
Page 8: Acceleration Sensor
6μA. 90dB buzzer A 90dB buzzer is installed in iB003N， which eliminates the limit of low voice. Meanwhile, also adds a buzzer with a low decibel to the iBeacon to meet user’s needs. -
Page 9: Beacon State
Disable ctable_ _Trigger_e _Always_e er_en ways_en Beacon State Register Description Table 2. Beacon State Register Description set the broadcast type Connectable_En Default value: 0 (0: Connectable_En disabled; 1: Connectable_En enabled) set Motion-Triggered Mode for the value of the acceleration Acc_Trigger_en Default value:0 (0: Acc_Trigger_en disabled;... -
Page 10: Ib003-N Works As An Ibeacon Alone
100 levels that is 1-100. (3) Use the UUID, Major, Minor values of the Beacon parameters as the Key, and broadcast the key and the battery information to outside, which can be received by scanning. The data can be broadcast twice every 50 seconds. -
Page 11: Ib003-N Works As An Eddystone Alone
Under this configuration, Beacon will be on Trigger Mode. When the Beacon moves, Beacon automatically broadcasts the data complying with the Eddystone protocol to outside. Beacon State: 0x18 Under this configuration, Beacon will enable both Broadcast Mode and Trigger Mode at the same time. Eddystone Data Default Setting -Data:0x0303d8fe0d16d8fe0021006a61616c656500... -
Page 12: Register Of Beacon Acc Data
Beacon moves, Beacon automatically broadcasts acceleration data to outside. Beacon State: 0x60 Under this configuration, Beacon will enable both keep on Broadcast Mode for acceleration data and Trigger Mode for acceleration data at the same time. Register of Beacon Acc Data Table 6. -
Page 13: Accbeacon Data Composition
Step 1: Download the latest version eBeacon software (version 2.0) from Apple store. Step 2: Open the Bluetooth and eBeacon software. Step 3: Tapping the Beacon for three to five times on hard things. Beacon can be connected at this moment when you heard buzzing. -
Page 14: Working Mode Detail
On Configuration Mode, beacon can be quickly connected and reconfigured, which needs triggered by tapping Beacon, and it will last for 45 seconds. It means that Beacon can be connected in 45 seconds after being triggered. And Beacon will restore to Sleep Mode or Normal Working Mode if it is not connected in 45 seconds. -
Page 15: Services Introduction
Note: The default configuration password is 0x666666, broadcast interval in units of 100 milliseconds, 0x0A is equivalent to 10 * 100 (ms) = 1(s). When connected, the user must input the password to 0xFFF1 port within 1 minute, otherwise the Beacon will disconnect with your phone. Service 0xFFD0 Table 10. -
Page 16: Service 0Xaa10
AnkhMaway-OFA User Guide v1.0 Note: the data of Eddystone is 28 bytes at the most. If the data is less than 20 bytes, user only Simplify Your Life needs to write the data in channel 0xFFD1. If not, user needs to write the former 20 bytes of the data in channel 0xFFD1 and write the latter bytes in channel 0xFFD2. -
Page 17: Service 0X1804
Table 16. Characteristics of service 0xFF60 Characteristic Property Value Length Function Write example 0x2A70 Read/Write 1 Byte Control Beacon Audio State 0x01 Notes: When the value is 0x01, means allowing the Beacon buzzing when wake-up or reset. 0x01: Buzzing when starting or tapped (default state). -
Page 18: Service 0X1802
Value Length Function Write example 0x2A06 Read/Write 1 Byte Call Beacon 0x01 Note: When put in value 0x01 to this port, it buzzing. 0x01: the buzzer with low decibel on 0x02: red light on 200ms 0x03: blue light on 200ms 0x04: vibrator on 200ms. -
Page 19: Service 0Xff40
0x01 battery level Note: The service is used to configure the way to add data of the Beacon battery. The following details: 0x01: Add the battery information at the end of the broadcast data. User can obtain it by scanning. -
Page 20: Operation State And Power Consumption
AnkhMaway-OFA User Guide v1.0 Item Test Data Remarks Simplify Your Life Chip model nRF51822 Nordic Semiconductor 256k Battery model CR2477 Coin battery, 3.0Vdc, 1pc MPLIFY LIFE Operation Voltage 1.8-3.6V Operation Frequency 2400-2483.5MHz Programmable Frequency Error +/- 20KHz Null Modulation Q-QPSK Null Sleep current About 3.6uA...
Need help?
Do you have a question about the iB003N and is the answer not in the manual?
Questions and answers