Do you have a question about the AI-Delta and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for ASTi AI-Delta
Page 1
500A Huntmar Park Drive Herndon, Virginia 20170 USA Tel. (703) 471-2104 • Fax. (703) 471-2108 www.asti-usa.com AI-Delta Technical User Guide Document: DOC-HW-DEL-UG-A-0 Advanced Simulation Technology inc. 500A Huntmar Park Drive, Herndon, Virginia 20170 USA Revision A, Version 0 (December, 2017)
Page 4
Revision history Date Revision Version Comments 12/8/2017 Initial baseline version.
Page 5
Contents 1.0 AI-Delta 2.0 Specifications 3.0 Audio input and output 3.1 Audio interface pinout 4.0 Control inputs and digital outputs 4.1 Control inputs 4.1.1 Control input as digital input 4.1.2 Control input as analog input 4.2 Digital output 5.0 Memory devices 6.0 Typical headset settings...
AI-Delta Technical User Guide (Rev. A, Ver. 0) 1.0 AI-Delta The ASTi Interface – Delta (AI-Delta) is a compact audio and I/O distribution device that con- nects local or remote operator headsets, speakers, control panels, and other peripherals to the net- work via Ethernet.
Page 8
AI-Delta Technical User Guide (Rev. A, Ver. 0) The AI-Delta includes the following features: Stereo support: supports stereo operation (i.e., independent left and right output) on a single connector, reducing cabling complexity Reduced footprint: takes up little space and fits easily on a desktop...
Table 2: DB-15 audio input values Note: The AI-Delta gain covers a total range of 65 dB. You can set the range of +10 dB to +65 dB in 1 dB steps; however, you cannot select the range 1 dB to +9 dB as a function of design.
AI-Delta Technical User Guide (Rev. A, Ver. 0) 4.0 Control inputs and digital outputs The AI-Delta's two USB connectors and DB-15 connectors also function as control inputs. The following sections describe the AI-Delta's control inputs and digital outputs, explaining how to use the control input as a digital input or analog output.
Figure 8: Analog In 4.2 Digital output The digital output circuitry consists of an opto-isolated, solid-state relay for switching power to external loads. The following table summarizes the AI-Delta's digital output opto-isolated field- effect transistor (FET) values: Type Opto-isolated FET...
AI-Delta Technical User Guide (Rev. A, Ver. 0) 5.0 Memory devices The following table summarizes AI-Delta devices with volatile and non-volatile memory. Volat- ile memory is erased when you unplug the device, while non-volatile memory is retained. Type Size User Modifiable...
AI-Delta Technical User Guide (Rev. A, Ver. 0) 6.0 Typical headset settings The AI-Delta supports a mono or stereo headset connection for the DB-15 connector. The fol- lowing figure shows a typical mono headset connection for the AI-Delta: Figure 10: DB-15 mono headset connection...
RMA numbers or appropriate contact information will not be tested. After 60 days, ASTi reserves the right to scrap all hardware received in this condition. 2. When packaging the equipment in question, make sure it is well-protected. Failure to prop- erly package the equipment during shipping could void the warranty.
Page 19
FedEx, unless otherwise directed. ASTi is responsible for return shipping charges on domestic items under warranty. If ASTi does not receive the equipment 30 days after the RMA was issued, ASTi closes the RMA and designates it as unused.
Need help?
Do you have a question about the AI-Delta and is the answer not in the manual?
Questions and answers