1. Manuals
  2. Brands
  3. INEW Digital Company Manuals
  4. Wireless Router
  5. IN-ROUTER-UW
  6. Product manual

INEW Digital Company IN-ROUTER-UW Product Manual

Cross wireless ap to usb router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Product Manual
Page 1 of 21
IN-ROUTER-UW Manual
Cross Wireless AP to USB Router
INEW Digital Company
Technical Support:
jglee@inewdc.com
TEL: 82-42-933-7328
FAX: 82-42-934-4829
www.inewdc.com
Wireless Internet for more comfortable, more fast and more easily
Make your network on Internet wirelessly

Advertisement

Table of Contents
loading

Summary of Contents for INEW Digital Company IN-ROUTER-UW

  • Page 1 Product Manual Page 1 of 21 IN-ROUTER-UW Manual Cross Wireless AP to USB Router INEW Digital Company Technical Support: jglee@inewdc.com TEL: 82-42-933-7328 FAX: 82-42-934-4829 www.inewdc.com Wireless Internet for more comfortable, more fast and more easily Make your network on Internet wirelessly...
  • Page 2 Product Manual Page 2 of 21 FCC STATEMENT FCC NOTICE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This devices may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
  • Page 3 3.1 PPP mode……………………………………………………………………………………………………….12 3.2 PPPoE mode…………………………………………………………………………………………………12 4. Setting Host PC………………………………………………………………………………………………………14 3.1 Setting Host PC……….…….………………………………………………………………………………14 5. Connecting with IN-ROUTER-UW’s web configuration page………………………………16 6. PPP mode Configuration…………………………………………………………………………………………18 7. Firmware Upgrade…………………………………………………………………………………………………20 Wireless Internet for more comfortable, more fast and more easily Make your network on Internet wirelessly...

  • Page 4: Copyright

    (electronic, mechanical, photographic, or otherwise) without the prior permission of INEWDC. Purpose This manual includes how to configure and use the IN-ROUTER-UW. Wireless Internet for more comfortable, more fast and more easily Make your network on Internet wirelessly...

  • Page 5: Introduction

    Wireless AP, USB Host functionality and an Ethernet regular interface. IN-ROUTER-UW connects directly to local network system like PC with wireless LAN card, other router utilizing an Ethernet interface for the purpose of wireless Internet or network.

  • Page 6: Appearance

    Product Manual Page 6 of 21 1.2 Appearance Below the figure 2 shows appearance and the each part of name of IN-ROUTER-UW. [Figure 2. Each part name of IN-ROUTER-UW] Wireless Internet for more comfortable, more fast and more easily Make your network on Internet wirelessly...

  • Page 7: Features

    Wide Range input voltage - Supplying voltage from 8 to 30[VDC] is available. 24-Pin diagnostic port - Simple UART_1: Console port for managing and monitoring IN-ROUTER-UW Upgrading IN-ROUTER-UW’s firmware. - Simple UART_2: an external UART Wireless Internet for more comfortable, more fast and more easily...

  • Page 8: Specification

    Product Manual Page 8 of 21 1.4 Specification 1.4.1 Mechanical Specification Dimensions 141 x 93 x 27 [mm], include side bracket Weight Approx. 220 [g] Housing Material CASE – A6010 , Brackets – A5010 [Table 1. Mechanical specification] 1.4.2 Environment Specification Operating conditions -0°C ~ +50°C , 85%(at 50°C), relative humidity (non-condensing)
  • Page 9 802.11g: Tx540mA@3.3V; Rx 360mA@3.3V Certification FCC, CE [Table 4. Wireless AP specification] 1.4.4 Hardware Specification Item Description Product Name IN-ROUTER-UW User MCU 32-bit Network Processor Program Memory 4M Bytes (Flash) Data Memory 16M Bytes (SDRAM) 24-Pin Data Port A console,RS232...
  • Page 10 Product Manual Page 10 of 21 (Simple Network Management Protocol agent/Trap) - RFC 1157 - Manage & Monitoring network equipment SNTP Client (Simple Network Time Protocol) - RFC 1769 - Synchronize computer clocks in global Internet ICMP (Internet Control Message Protocol) - RFC 792 - Checking error and sending message User-friendly Web-based Management with CGI...

  • Page 11: Composition

    Product Manual Page 11 of 21 2. Composition 2.1 Hardware composition All hardware for IN-ROUTER-UW is composed below. 1. IN-ROUTER-UW 2. UTP Cable(Direct) 3. 12 [VDC] Adapter Note. 1. IN-ROUTER-U: Wireless LAN Router(including two Wireless AP Antenna) 2. UTP Cable: Connecting cable between Host PC and IN-ROUTER-U.

  • Page 12: Operation Process

    First, Host PCs get each private IP(hereby IP-1) from IN-ROUTER-UW via DHCP server. Second IN-ROUTER-UW gets public/Private IP(hereby IP-2) from ISP via external CDMA 1x EVDO modem. Now IN-ROUTER-UW has two kinds of IP, one is from ISP and the other ones are to Host PCs. Third, IN-ROUTER-UW convert network data between IP-1 and IP-2 via NAT.
  • Page 13 Product Manual Page 13 of 21 As different on PPP mode, the IP from ISP goes to Host PC directly. IN-ROUTER-UW converts protocol from PPP to PPPoE or on reverse-direction, the Host PC processes all network protocols. Wireless Internet for more comfortable, more fast and more easily...

  • Page 14: Setting Host Pc

    Product Manual Page 14 of 21 4. Setting Host PC IN-ROUTER-UW is already set for normal operation. So just connect between PC and IN-ROUTER-UW. Check the network environment of Host PC. 4.1 Setting Host PC For accessing Internet, should obtain IP automatically so refer below steps.
  • Page 15 Product Manual Page 15 of 21 (3) Chose “Internet Protocol[TCP/IP]” Tab and double click the item. [Figure 7. Third step of setting the Host PC] (4) Check the “Obtain an IP address automatically” then click the [OK] button. [Figure 8. Forth step of setting the Host PC] (5) Host PC’s setting is finished.
  • Page 16 Page 16 of 21 5. Connecting with IN-ROUTER-UW’s configuration web page User can change the function of IN-ROUTER-UW by configuring it for user’s purpose. Supports the web based configuration pages for simplified installation and setup. Figure 9 shows connection on IN-ROUTER-UW’s configuration.
  • Page 17 : Status of shared IP of eth0 and wlan0 ppp0: Status of mobile IP (7) We can see the configuration web page in IN-ROUTER-UW. Now try to set each configuration for each mode. Wireless Internet for more comfortable, more fast and more easily...

  • Page 18: Ppp Mode Configuration

    Page 18 of 21 6. PPP mode Configuration We assume that IN-ROUTER-UW current mode is not PPP mode in this chapter. (1) Connect Power cable and external USB mobile modem on IN-ROUTER-UW. (2) Follow the chapter 4, connect IN-ROUTER-UW’s configuration web page.
  • Page 19 Product Manual Page 19 of 21 (5) Disconnect power cable then reconnect it or push reset button on left side. (6) If the external modem works, The “N” LED is blinking. (7) Click the “LAN” menu. You can see that the “ppp0” interface appears like Figure 13 when external mobile modem is recognized.

  • Page 20: Firmware Upgrade

    Product Manual Page 20 of 21 7. Firmware Upgrade Firmware is for IN-ROUTER-UW. When the firmware is to be upgrade or to be download, use like this. (1) Connect Power cable on IN-ROUTER-UW. (2) Follow the chapter 4, connect IN-ROUTER-UW’s configuration web page.
  • Page 21 Product Manual Page 21 of 21 (All document finished) Thank you. Wireless Internet for more comfortable, more fast and more easily Make your network on Internet wirelessly...

Table of Contents