If the apparatus is not maintained in a good state of cleanliness, its surface could be degraded and affect the lifespan of the apparatus and lead to a dangerous situation. Specifications Model MW100011 Rated Voltage 220 – 240V AC Rated Input Power (Microwave) 1550W...
Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in anyway. Return to Semak or an authorised service agent for repair. CAUTION Hot Surfaces. NEVER leave the appliance ON unattended. ALWAYS unplug after use.
Safety Instructions When using electrical appliances basic safety precautions should be followed, including the following; WARNING - To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy: 1. Read all instructions before using the appliance. 2.
13. Remove wire twists-ties and metal handles from paper or plastic containers/bags before placing them in the oven. 14. Install microwave only in accordance with the installation instructions provided. 15. Eggs in the shell & whole hard-boiled eggs should not be heated in microwave ovens since they may explode, even after microwave heating has ended.
Cleaning Be sure to unplug the appliance from the power supply 1) Clean the inside of the over after using with a slightly damp cloth 2) Clean the accessories in the usual way in soapy water 3) The door frame, seal, and neighbouring parts must be cleaned carefully with a damp cloth when they are dirty Utensils Materials you can use in Microwave Oven...
Installation Countertop Installation Remove all packing material and accessories. Examine the oven for any damage such as dents or broken door. Do not install if oven is damaged. Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron.
Page 10
Operating Instructions The buzzer will sound once and "0:00" will display when the oven is turned on. 1. Microwave Cooking 1) In waiting state, press "POWER", "PL 1 0" displays. 2) Press number keys between 0-9 to choose power level. For example, when choose 60% microwave power, press "6", "PL6"...
Page 11
3.Multi-Stage Cooking Two stages can be maximumly set. The buzzer will ring once after each stage and the next stage will begin. Note: Memory function cannot be set as one of the multi-stage. Example: lf you want to cook the food with 70% microwave power for 5 minutes, then to cook with 50% microwave power for 7 minutes.
Page 12
i. Press "TIME", "0:00" displays. j. Press "5","4","0" to choose cooking time. k. Press "MEMORY" to save the setting to number 3. Or press "START" to start the cooking and save the program to number 3. Note: 1) The program will save all the time if the electricity is cut off. 2) If you want to modify the program, repeat the above steps to reset and save.
Page 13
8. Cooking End Reminding Function When cooking ends, there will be 5 beeps which is reminding the completion of cooking. 9. Display Specification (1) In waiting state, LED will display clock and ":" will flash. (2) In function setting state, LED will display the related setting. (3) In the operation and suspending state, LED will display the residual cooking time.
Important Recommendations Only use only microwave safe vessels, DO NOT use steel or any other vessel. Temperature of foods---for best results it is recommended that foods conventionally prepared be slightly undercooked when subsequently heated in this oven. Remember that after the heating cycle has been completed, internal food temperatures continue to rise slightly in foods heated in this oven.
For Best Cooking Results When determining time for particular foods, always figure minimum time and check occasionally during cooking for progress. The microwave oven cooks so quickly, therefore it is easy to overcook your foods. Be careful of the cooking time for small quantities of foods, or foods with low water content.
Service & Maintenance The Semak Commercial Microwave does not contain user-serviceable parts. For Service and Repair, contact Semak for your nearest Authorised Service Agent The Foodservice Industry is deemed a hostile environment within the scope of AS/NZS 3760:2003. Semak Commercial Microwave MUST be routinely electrically tested for compliance with this standard if used commercially.
Page 17
Failure to do this will void product warranty. 5. Cost of transport of any appliance or part to and from SEMAK or its Service Agent is to be paid by the owner. 6. A charge will be made where failure is due to neglect, abuse or accidental damage on the part of the operator, or when no fault can be found or the fault is due to causes outside the control of Semak Australia.
WARRANTY REGISTRATION Retain for Future Reference DO NOT SEND Please complete one registration for each Semak appliance. You may be required to provide this information when requesting after sales service. Please staple your proof of purchase to this page. Company Name: ________________________________________________...