Do you have a question about the Gutter Sweep GS900 and is the answer not in the manual?
Questions and answers
Summary of Contents for HY-C Gutter Sweep GS900
Page 1
Rotary Gutter Cleaning System (GS900) Operator’s Manual GutterSweep Thank you for purchasing the ™ Rotary Gutter Cleaning System. Please follow the important safeguards and operating instructions included within GutterSweep this manual to enjoy the benefits & safe operation of the ™...
1 Year from the date of purchase. Should any components fail due to manufacturing defect, return the defective part to Gardus, a HY-C Company and we replace it free of charge. A return authorization number (RAN) is required prior to returning any item.
Page 3
Table of Contents Getting Started ................3 Cleaning Gutters With Rotary Paddle Brush .
Page 4
Getting Started Getting Started Locking Sleeve to Base Pole Assembling Tool Locking Sleeve to Base Pole Assembling Tool Step 1: Step 1: Step 1: Connect Pole Sections. Connect Pole Sections. Slide Sleeve on “Base” Be sure upper pole section is Be sure upper pole section is locked pole to second hole in locked into place by rotating into place by rotating section until the sleeve until locked in section until the button locks into button locks into sleeve.
Page 5
This will help determine what type of debris is in the gutter and what Determine Type of Build‐Up In Gutters: cleaning attachment to choose for the job. Step 1: Step 2: Determine Type of Build-Up In Gutters: Once the tool is assembled, use the “Camera Mount” with your digital If you don’t have a digital camera, simply use the “Gutter Brush” camera to get a photo or short video of your gutters prior to cleaning. attached to the curved section to “Drag & Lift” the debris up and out of r s : n p I d ‐ u i l f o e This will help determine what type of debris is in the gutter and what the gutter to determine what type of build‐up is inside the gutter Step 1: cleaning attachment to choose for the job. before choosing the best cleaning tool for the type of build‐up. ...
Page 6
Rotary Gutter Cleaning: (cont.) Rotary Gutter Cleaning: (cont.) Step 2: Gutter Supports: Once you reach a gutter support; 1) Clean completely under the support until the curved tube makes contact with the gutter support, 2) Pull the Paddle Brush back slightly and lift up and over gutter support, 3) Lower the paddle brush back into the gutter and continue cleaning.
Page 7
Cleaning with Non-Rotary Attachments “Remove & Rinse” Cleaning with the “Gutter Brush” Step 1: Determine Type of Build-Up in Gutters: Attach “Handle” to end of base - Refer to page 4 pole section facing up as shown Step 2: Connect as many pole sections as needed to reach desired gutter height. Note: A 6 ft.
Page 8
Rinsing the Gutter: water. Cleaning with Non-Rotary Attachments Connect the “Water Control Valve” & gard Built‐In Water Jet Nozzle hose to the base pole section. Cleaning with Non‐Rotary Attachments Rinse the inside and outside of the gutter using the built in water jet nozzle of the “G Step 7: Brush” or “Gutter Scoop”. Collect debris on tarp & dispose. Step 7: It’s best to clean the ground area before rinsing the gutter clean with water. Collect debris on tarp & dispose. It’s best to clean the ground area before Step 8: rinsing the gutter clean with water.
Need help?
Do you have a question about the Gutter Sweep GS900 and is the answer not in the manual?
Questions and answers