Summary of Contents for Integration IA OEM-DAUB1 2400
-
Page 1: Quick Start Guide
IA OEM-QSUB1 2400 IA OEM-DAUB1 2400 802.15.4/ZigBee™ Dongle Quick Start Guide Version 1.0r IA OEM-QSUB1 2400 Rev 01.0r 0606 ©2006, Integration Associates, Inc. - Page 2 In no event shall Integration Associates, Inc., or its suppliers be liable for any damages whatsoever arising out of the use of or an inability to use the materials. Integration Associates, Inc., and its suppliers further do not warrant the accuracy or completeness of the information, text, graphics, or other items contained within these materials.
-
Page 3: Safety Information
Caution: To avoid damage to this product never allow any liquids to spill into any part of the product, and never expose the product to rain or to water. If any of those events occurs switch off the product immediately. Contact an authorized Integration service provider for assistance before attempting to use the product again. - Page 4 TABLE OF CONTENTS Safety Information ........................................ii Table of Contents ........................................iii 1. Introduction ........................................... 4 Welcome to the IA OEM-DAUB1 2400 ................................ 4 1. Introduction ........................................... 5 What’s in the Box......................................5 2. Installation ..........................................6 System Requirements ....................................6 Operating System .....................................
-
Page 5: Introduction
1. INTRODUCTION WELCOME TO THE IA OEM-DAUB1 2400 Congratulations on your purchase of this quality Integration product. This manual explains how to install and use the IA OEM- DAUB1 2400 unit. The Integration IA OEM-DAUB1 2400 provides a simple interface between USB enabled devices and 802.15.4/ZigBee Devices. -
Page 6: Introduction
1. INTRODUCTION WHAT’S IN THE BOX Now you have purchased your IA OEM-DAUB1 2400 unit, and while Integration products are carefully packed to prevent damage in transit, we recommend that the product is unpacked and inspected immediately on receipt. If damage has occurred please advise your carrier and your supplier who will arrange appropriate action. -
Page 7: Installation
Your system should come with a pre-installed operating system or you may choose to upgrade your operating system to the latest version. Below you will find a list of those that the IA OEM-DAUB1 2400 software supports. Check to make sure that you have the following minimum operating system: •... -
Page 8: Setting Up The Hardware
SETTING UP THE HARDWARE The IA OEM-DAUB1 2400 unit can be considered a plug and play device since all that is required is a USB port on your computer. Installing the IA OEM-DAUB1 2400 Dongle is simple, either connect directly to the USB port or via a USB extension cable to the USB port as shown below. -
Page 9: Setting Up The Software
Installing the IA OEM-DAUB1 2400 Drivers Ensure the IA OEM-DAUB1 2400 dongle is connected to the USB port on your computer. Microsoft Windows will recognize a new USB Device that has been connected to the computer’s USB port and the following window will appear. - Page 10 2. INSTALLATION Select and click on the “Install from a list or specific location” radio button. Click the Next button to proceed to the following screen Select the “search removable media (floppy CD- ROM...)” tick box. Ensure the supplied CD-ROM is installed in the CD-ROM Drive. Click the Next button to proceed.
- Page 11 2. INSTALLATION ► IMPORTANT NOTE: The window shown opposite will be displayed, this is normal. Click the “Continue Anyway” button to proceed. Please wait whilst the wizard installs the IA OEM-DAUB1 2400 Loader drivers onto your computer.
- Page 12 2. INSTALLATION Microsoft Windows will recognize a new ZigBee Dongle that has been connected to the computer’s USB port and the following window will appear. Select and click on the “No, not this time” radio button. Click the Next button to proceed to the following screen.
- Page 13 2. INSTALLATION Select and click on the “Install from a list or specific location” radio button. Click the Next button to proceed to the following screen...
- Page 14 2. INSTALLATION Select the “Search removable media (floppy CD- ROM...)” tick box. Ensure the supplied CD-ROM is installed in the CD-ROM Drive. Click the Next button to proceed. ► IMPORTANT NOTE: The window shown opposite will be displayed, this is normal. Click “Continue Anyway”...
- Page 15 2. INSTALLATION Please wait whilst the wizard installs the IA OEM-DAUB1 2400 drivers onto your computer. The drivers have been successfully installed when the window below is displayed. Click the Finish button to close the wizard. Your IA OEM-DAUB1 2400 device is now installed and ready for use.
-
Page 16: Verifying Drivers Installation
2. INSTALLATION Verifying Drivers Installation After installation is complete, you may check the driver components are installed on your computer via the Windows Device Manager as follows: From the Windows desktop select Start, right click on My Computer. Select Properties. Select the Hardware Tab and click on the Device Manager button. -
Page 17: Maintenance
3. MAINTENANCE Your IA OEM-DAUB1 2400 requires minimal maintenance. Care and Cleaning Plastic surfaces are easily scratched and can be marred by alcohol and various solvents. To keep your product clean, gently wipe with a soft clean lightly dampened cloth to dust this product, avoid excessive use of oil-based furniture polishes since the materials... -
Page 18: Troubleshooting The Ia Oem-Daub1 2400
4. TROUBLESHOOTING THE IA OEM-DAUB1 2400 Please check to see if any problem you may have with your IA OEM-DAUB1 2400 is described here before taking it for service or calling for support. Problem Possible Solution? • Try an alternative USB port on the computer. -
Page 19: Technical Support
• Complete name of product • Version number on the CD-ROM, if any • Version number and date stamp of the .inf, and .dll files. • Specific details of the problem • Complete information on your computer system setup WORLDWIDE Contacting Support: Email: wireless.support@integration.com... -
Page 20: Technical Specification
DECLARATION OF CONFORMITY CE Conformity We, Integration Associates, declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the related European Directives. CE marking is the responsibility of Integration Associates Inc. USB Certification This device has been certified to be used with USB compliant hardware platforms. -
Page 21: Index
System Requirements, 7 Technical Specification, 20 Technical Support, 19 Troubleshooting the IA OEM-DAUB1 2400, 18 Upgrading / Updating the IA OEM-DAUB1 2400, 18 Verifying Drivers Installation, 16 Warranty, 22 Welcome to the IA OEM-DAUB1 2400, 5 What’s in the box, 6... - Page 22 Integration dealer from whom you purchased the product. Proof of purchase may be required.
-
Page 23: Notes
NOTES... -
Page 24: Related Products And Documents
MECHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE info@integration.com OFFERED IN THIS DOCUMENT. wireless.support@integration.com IUK286 ©2006 Integration Associates, Inc. All rights reserved. Integration Associates is a trademark of Integration Associates, Inc. All other trademarks belong to their respective owners.
Need help?
Do you have a question about the IA OEM-DAUB1 2400 and is the answer not in the manual?
Questions and answers