FT1022 Instruction Manual IMPORTANT Please read through this Manual carefully before using the FT1022. This tool must only be used for sanding and within the parameters outined in this manual. All users of the equipment should be trained in any risks associated with the products they are sanding or using as finishing aids.
Page 3
Check you have no loose clothing, hair, jewellery or any other items of a personal nature that might become entangled with the rotating parts. Check you have a maximum inlet air pressure of 90PSI/6.3BAR. Fast Mover Tools Limited T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com www.fastmovertoolsuk.com...
Page 4
We recommend that your air tool is connected to the main airline in the way displayed in Fig. 2. 1: Air Tool 2: Whip Hose/Leader Hose 3: Air Fitting 4: Quick Coupling 5: Main Air Hose Fast Mover Tools Limited T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com www.fastmovertoolsuk.com...
Page 5
These can be obtained from your supplier. Replace worn or damaged parts using genuine parts only. Store tool in a dry area, do not allow tool to be immerse in water or used/stored in wet conditions. Fast Mover Tools Limited T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com www.fastmovertoolsuk.com...
Page 7
- A warranty claim will not be accepted without an official proof of purchase from your supplier. Warranty Verification Please keep this manual with your tool for the purpose of verifying your warranty. Fill in box below to validate warranty. Fax to 01582 667100 Tool Code: FT1022 Your Details Place of Purchase Company ________________________ ____________________________________________...