Summary of Contents for SMARTOOO 7614
-
Page 1: User Manual
SMART LINK ELECTRONICS LIMITED www.smartooo.com HDMI 1x4 TV WALL Model: 7614 User Manual... - Page 2 SMART LINK ELECTRONICS LIMITED www.smartooo.com 1. Introduction SMARTOOO 7614 1 by 4 HDMI TV Wall support CVBS/VGA/HDMI/USB play input sources to be freely arranged on 4 displays. The embedded scaler converts signals from the input sources to match the native resolution of monitors, flat panel displays, projectors as well as user-selectable output settings .
-
Page 3: Package Contents
SMART LINK ELECTRONICS LIMITED www.smartooo.com Perfectly as a video screen splitter, a video converter and a video switcher; 3. Package Contents HDMI 1 x4 TV Wall 1pcs 12V/2.5A DC power adaptor 1pcs Operation Manual 1pcs 38KHz IR Receiver cable 1pcs ... - Page 4 SMART LINK ELECTRONICS LIMITED www.smartooo.com Power Button: Press this button to power the device on/off. 2) Power Led: The LED will illuminate green when the power is on, red when it is in 'Standby' mode. IR Receiver window (accepts the remote control signal of this device only).
-
Page 5: Remote Control
SMART LINK ELECTRONICS LIMITED www.smartooo.com Connect with source equipment such as DVD/Blue-ray players, PC, Game console or USB disc devices to CVBS,VGA,HDMI,USB input port. 4) DC 12V Plug the 12V/2.5A DC power supply into the DC12V power in. Remote Control ①... -
Page 6: Connection And Installation
SMART LINK ELECTRONICS LIMITED www.smartooo.com 6.Connection and Installation 2x2 TV Wall 3x3 TV Wall... - Page 7 SMART LINK ELECTRONICS LIMITED www.smartooo.com 7.TV Wall connection sequence diagram 1x2(H) 1x3(H) 1x4(H) 1x2(V)
- Page 8 SMART LINK ELECTRONICS LIMITED www.smartooo.com 1x3(V) 1x4(V)
- Page 9 SMART LINK ELECTRONICS LIMITED www.smartooo.com Cascade 2...
- Page 10 SMART LINK ELECTRONICS LIMITED www.smartooo.com TV Wall controller user guide Installation: The TV Wall controller is a green software. Just copy TVWallController.exe to PC which is used to control the TV Wall by RS232 COM port or TCP/IP to complete installation.
- Page 11 SMART LINK ELECTRONICS LIMITED www.smartooo.com 1. Select RS232 COM or TCP mode. 2. Select RS232 COM port. 3. Click to connect or disconnect PC with TV Wall. 4. Select TV Wall IP. 5. Connect to TV Wall IP. 6. Search TV Wall IP.
- Page 12 SMART LINK ELECTRONICS LIMITED www.smartooo.com “Mode” page 1.TV Wall Mode selection. 2.TV Wall Picture Bezel correction adjustment. Figure 1 and Figure 2 will show you the difference between the original image and the image adjusted. Figure 1 The Original Image...
- Page 13 SMART LINK ELECTRONICS LIMITED www.smartooo.com Figure 2 The Image Adjusted “Setup” page 1. Input sources selection. 2. Output resolution selection. 3. Output mode selection. 4. Audio out volume adjustment.
- Page 14 SMART LINK ELECTRONICS LIMITED www.smartooo.com “Upgrade” page The TV wall have two mcu (main and sub)can be upgraded. 1. Main mcu upgrade: Click to open FW file(file extension is “.bin”). Click to upgrade the Matrix software Display the message of the software upgrade process.
Need help?
Do you have a question about the 7614 and is the answer not in the manual?
Questions and answers