Crepe Maker User Manual Thank you for purchasing this range of appliance of our company. Proper attention to preventative maintenance and scheduled maintenance procedures will prolong the life of the appliance. Warning: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death.
Page 3
Crepe Maker User Manual 1. General information 1.1 Information about the user’s manual 1.2 Other regulations 1.3 Note 2. Safety 2.1 General information 2.2 Safety instructions for the commercial use of the device 2.3 Intended use 3. Packaging and storage 3.1 Packaging 3.2 Storage 4.
Page 4
Crepe Maker User Manual manual should be kept near the appliance, easily accessible for anyone to operate the unit. We reserve the right to make technical changes for purposes of developing and improving the useful properties. 2. Safety This section provides an overview of all important safety aspects. Attention should be paid to all symbols, markers and labels on the device, which must be kept in a permanent state of legibility.
Page 5
In case of longer storage (> 3 months), make sure you check the state of the packaging regularly. 4. Technical data Model Voltage (V) Frequency (Hz) Power Input (W) Dimension (mm) TT-E8 220~240 50/60 3000 450×485×240 TT-E9 220~240 50/60 6000 860×485×240...
Page 6
Crepe Maker User Manual ● Note that the power cord should never touch any heat sources or sharp edges. Never let the power cord dangle over the counter edge. ● Stop using the appliance immediately if malfunctions of the unit occur. Unplug the appliance.
Page 7
Crepe Maker User Manual 6. Transportation, Cleaning and maintenance 6.1 Transportation In the process of transportation, the appliance should be handled carefully, preventing the intense shaking. The packaged appliance should be stored in a well-ventilated area free of caustic air. It cannot be placed in the outside area and should never be put upside down.
Crepe Maker User Manual done to the whole unit and its internal wire if the wrong type of power cord has been used for replacement. ●Only qualified electrician or personnel may perform the repair of the unit. All the necessary replaced parts have to be the types designated by the manufacturer. Never attempt to repair the unit on your own.
Page 9
Crepe Maker User Manual your local dealer if you have any questions concerning installation, operation or maintenance of this equipment. IMPORTANT: DO NOT DISCARD THIS MANUAL This manual is considered to be part of the appliance and is to be given to the owner or manager of the hotel or restaurant, or to the person responsible for training operators of this appliance.
Need help?
Do you have a question about the TT-E8 and is the answer not in the manual?
Questions and answers