Honeywell TAM-412 Quick Start Manual page 7

Add the Terminal to ViewPoint Fleet
After you have activated your terminal and registered it in
ViewPoint, you need to add it to your ViewPoint Fleet.
1 Make sure that the terminal is activated with airtime.
2 Click Add Terminal. The Add Terminal dialog box
appears.
3 Type the ISN and Terminal serial number.
4 Type a new Fleet Name.
5 Click Add Terminal.
6 When prompted, select your terminal from the drop-down
menu.
7 Click Confirm.
Add Additional Terminals to ViewPoint
1 Make sure that the terminal is activated with airtime.
2 From the menu at the top of the page, click Terminals.
3 Click Add Terminal.
TAM-401 Series Satellite Terminal Quick Start Guide 7