Page 1
VINCELL 7.0" Senso-Glass IPS Manual For PCB revision 0.7 or for HW 1.1 or later...
Page 2
VINCELL 7.0" Senso-Glass IPS Manual Content Introduction Safety Hints Product Introduction Product introduction Type plate and device information Related documents and online support Product Description Technical data PCB design Installation and start up Connection Scheme External interfaces and Schematics Ethernet (X24)
VINCELL 7.0" Senso-Glass IPS Manual 1 Introduction Thank you very much for purchasing a Garz & Fricke product. Our products are dedicated to professional use and therefore we suppose extended technical knowledge and practice in working with such products. The information in this manual is subject to technical changes, particularly as a result of continuous product upgrades.
VINCELL 7.0" Senso-Glass IPS Manual 2 Safety Hints Please read this section carefully and observe the instructions for your own safety and correct use of the device. Observe the warnings and instructions on the device and in the manual. Garz & Fricke embedded system have been built and tested by us and left the company in a perfectly safe condition.
VINCELL 7.0" Senso-Glass IPS Manual 3 Product Introduction This document is applicable for hardware revisions 1.0 or later of the VINCELL SERIES and thereon based customized variants. Please note that customized variants might possibly not support all features listed herein.
VINCELL 7.0" Senso-Glass IPS Manual Related documents and online support This document contains product specific information. Additional documentation is available for the use of embedded operating systems and the related tool chain and the RedBoot BIOS. Description Title Link to Garz & Fricke Website...
VINCELL 7.0" Senso-Glass IPS Manual 4 Product Description This drawing is meant for your orientation. For drawing please refer to Annex C: You will get 3 D Modell (CAD) Drawings after signed a NDA contract. Front Glass Display with Capacitive Touch...
VINCELL 7.0" Senso-Glass IPS Manual Technical data Class Freescale ARM®-Cortex -A8 i.MX537 Type/Clock 800 MHz NEON SIMD media acceleration and VFP operations L1 cache, 32 KB for instruction, 32 KB for data Features Unified 256 KB L2 Cache Multi-format HD 1080p video decoder and HD 720p video encoder hardware engine OpenGL®...
Page 9
VINCELL 7.0" Senso-Glass IPS Manual Touch Type Projected Capacitive Input Type Multi Touch Resolution 1792 x 1024 Surface Hardness 7H (min) Power Supply and Consumption Nom. 24 ± 15% Supply [V DC] Max. 9 ~ 36 PoE Supply (optional) IEEE 802.3at-2009 class 4 Consumption [W] Typ.
VINCELL 7.0" Senso-Glass IPS Manual PCB design As this manual describes a senso-glass version, only the external interfaces will be mentioned in the following chapter. Pos. Description Pos. Description Ethernet (X24) USB - Host (X34) Power (X1) USB - OTG (X20)
VINCELL 7.0" Senso-Glass IPS Manual 5 Installation and start up The content of this document is limited to explain the device connectors and how to access VINCELL via FTP over your local area network (LAN) within a few seconds. For advanced hardware specifications and software...
VINCELL 7.0" Senso-Glass IPS Manual 6 External interfaces and Schematics Ethernet (X24) Name Description Information Rx/Tx might be swapped (Auto-MDIX) +/- might be swapped SPARE1 Power Supply (PoE) (Autom. polarity correction) PoE might also be injected via Rx/Tx lines. SPARE2...
VINCELL 7.0" Senso-Glass IPS Manual Power (X1) Name Description Level DC Ground Nom. 24 ± 15% Vcc_In DC Input voltage Max. 9 Header: Molex 43045-0200 Micro-Fit 2p Plug: Molex 43025-0200 Micro-Fit 2p, crimp contact Molex 43030-0007 Shielding with 6,3 mm male spade terminal connector Pin 1 (GND) is connected to frame/housing through L129.
VINCELL 7.0" Senso-Glass IPS Manual Digital I/O (X14) Name Description Level DIG_IN1 Input 1 Low Typ. 8.3 mA / 24 V DIG_IN2 Input 2 3-36V High GND_DIO Ground for digital IO group Common ground, can be bridged with GND_DIO, when galvanic...
VINCELL 7.0" Senso-Glass IPS Manual CAN/RS-485 Interface (X39) Name Description Level GND_CAN_RS485 Ground for CAN and RS485 group To enable CAN1-Termination, bridge CAN1_TERM with CAN1_H -24…+24 V CAN1_H CAN bus 1 high -24…+24 V CAN1_L CAN bus 1 low To enable CAN1-Termination, bridge...
VINCELL 7.0" Senso-Glass IPS Manual USB - Host (X34) Name Description Level USB_H1_VBUS Power supply +5 V DC USB_H1_DN Data minus (D-) USB_H1_DP Data plus (D+) Ground Header: USB Type A USB - OTG (X20) Name Description Level USB_OTG_VBUS Power supply...
VINCELL 7.0" Senso-Glass IPS Manual 7 Suppliers and sources Models and types of connectors respectively plugs related to VINCELL are listed in chapters and due to the purchasing situation at time of production, connectors of other brands could be used instead.
Page 23
VINCELL 7.0" Senso-Glass IPS Manual Technical Appendix For PCB revision 0.7 or for HW 1.1 or later...
VINCELL 7.0" Senso-Glass IPS Manual Annex A: Assembly options and accessory A-1 WIFI (USB) Some appliances require a wireless network connectivity. To be more flexible in regard of upcoming WiFi Standard and approbations, we decided not to place the functionality on board. Therefore we recommend an external USB (WL250N).
VINCELL 7.0" Senso-Glass IPS Manual A-2 VINCELL Senso-Glas Version M VINCELL is also available as minor assembly version. For the details of the external connectors please use the main part on page Pos. Description Ethernet (X24) Power (X1) RS-232/MDB (X13)
VINCELL 7.0" Senso-Glass IPS Manual Annex B: Hardware revision information This document is applicable for all products listed below. Please note that customized variants might possibly not support all features listed herein. Additional features are documented in specific attachments. Platform...
VINCELL 7.0" Senso-Glass IPS Manual Annex E: Battery E-1 Battery Specifications The internal single board computer is equipped with a Primary Lithium battery (type CR1220), which has a typicallifetime of 8 years. In case of presence of SRAM, battery has lifetime of about 2 years. (75% power down) Danger of explosion when replaced with wrong type of battery.
VINCELL 7.0" Senso-Glass IPS Manual Annex F: Guidelines and Standards F-1 RoHS Declaration Devices comply with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of 8th June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
VINCELL 7.0" Senso-Glass IPS Manual Annex G: Common documentation G-1 Warranty hints Garz & Fricke embedded systems are subject to manufacturer’s guarantee as long as the products are handled with adequate care and caution and in accordance to this manual.
VINCELL 7.0" Senso-Glass IPS Manual G-2 Application notes The products covered by this document are designed and manufactured for the following applications (I). If you intend to use these products in applications as quoted in (II) or (III) we highly recommend a personal contact with our consultants and/or technical sales team.