Advertisement
Table of Contents
Advertisement
Table of Contents
Summary of Contents for Xime PB-X800
- Page 1 4224-0048-00 Rev.00...
- Page 2 * The following instructions are intended to help you use this Bidet safely and correctly in order to prevent unexpected danger or damage. So, please observe them. * The safety-related instructions are indicated as shown below depending on the degree of danger or damage and its urgency that may arise from inappropriate use.
- Page 3 Do not attempt to disassemble, repair or If the product has not been used for a Prevent the Control Panel from contact Do not spray water on the product or modify the product. prolonged period, operate the with water. use in excessively damp place. cleansing or bidet process 2 to 3 It may cause electric shock It may cause fire or electric shock.
-
Page 4: Features
Fragrance can be mounted and used to Water filter makes water even cleaner. product, it may cause maintain fragrant air. (Connect in the right direction) electric shock. Caution Please do not slam down the seat or cover. It may cause breakdown. (Except PB-X1000, PB-X800) (Except PB-X800) - Page 5 “Seat Temp.” during 3 Use this button to select seconds. the nozzle for anal cleaning. WATER PRESSURE Press this button two (Except PB-X800) (Except PB-X800, PB-X1000, PB-X2000) buttons times to use Auto- Use these buttons to adjust cleaning. DRYER WATER PRESSURE water pressure.
- Page 6 Use this button to select one of 4 levels of toilet seat temperature. To stop seat sensor, please press the button of “Seat Temp.” during 3 seconds. POWER-SAVE button PB-X2000, PB-X1000 PB-X800...
-
Page 7: Installation
1 Bidet Hose T-Valve (for Main Body) (Except PB-X800) Replaceable water filter is a consumable part. They are available from authorized service agents. Replacement Interval: Approx. 6 month if general water supply is used. (It may vary depending on the quality of water) -
Page 8: Installation
Check if operation stops by pressing the STOP button. DRY Function Check (Except PB-X800, PB-X1200) Connect the detached water tank hose of the Check if warm air blows out from right side of the nozzle by toilet to the T-Valve. -
Page 9: Cleaning
The nozzle movement will last throughout the duration of Bidet operation. Position the nozzle using the backward and forward 3. Press DRY button (Except PB-x800, PB-X1200) adjustment buttons. Drying is quicker if you wipe the wet area lightly with toilet paper before using this function. -
Page 10: Storing
Always unplug the power cord before cleaning. While the water is being sprayed, Water Outlet and Filter Press High or Low button Close the water supply valve Initial pressure after the installation is High If water does not flow due to low water pressure, set to High using the adjustment button Press the DETACH button and pull the product forward. - Page 11 Automatic Cleansing & Drying Toilet PRODUCT NAME Can not operate the Bidet at all Is the power plug not loose? PB-X800 / PB-X1000 / PB-X1500 / PB-X2000 / PB-X2500 MODEL Power failure perhaps? AC 230V 50Hz RATING Max. 580W POWER CONSUMPTION 1.5m (length)