Download Print this page

OHIOSTEEL 48CP Manual

48 inch core plug lawn aerator

Advertisement

Quick Links

48CP
48" CORE PLUG LAWN AERATOR
U.S. Patent No. 6,675,905
READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS BEFORE USING THIS EQUIPMENT
Assembled in U.S.A. of domestic and imported components
6000203-REV B
10/15

Advertisement

loading
Need help?

Need help?

Do you have a question about the 48CP and is the answer not in the manual?

Questions and answers

Summary of Contents for OHIOSTEEL 48CP

  • Page 1 48CP 48” CORE PLUG LAWN AERATOR U.S. Patent No. 6,675,905 READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT Assembled in U.S.A. of domestic and imported components 6000203-REV B 10/15...
  • Page 2 Assembly Instructions Slide Bushings, Spools, and Spacers onto both ends of Axle as shown. Attach Side Plates to Top Plate and tighten hardware. Install final Bushings onto both ends of Axle. Slide Wheel Brackets onto Axle as shown and tighten hardware. Slide Washers and Wheels onto Wheel Brackets and install Cotter Pin.
  • Page 3 Safety Rules This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read and understand all safety rules and operating instructions before using this tractor attachment.
  • Page 4 Carton Contents 3 (x2) 2 (x2) 1 (x1) 6 (x1) 4 (x1) 7 (x1) 5 (x1) 9 (x2) 10 (x5) 15 (x2) 8 (x2) 12 (x40) 11 (x40) 13 (x10) 16 (x1) 14 (x2) 19 (x1) 18 (x40) 17 (x40) 20 (x1) 26 (x1) 24 (x4)
  • Page 5 Assembly Instructions Attach Hitch to Top Plate and tighten hardware. NOTE HOLE LOCATION Attach Center Plates to Top Plate and tighten hardware. Insert Bushings to hold Spool in place. Hold Foot Lever in place and slide Axle into position, then tighten hardware. Install Tube Plugs into Foot Lever using a mallet if necessary.
  • Page 6 Assembly Instructions Hook the Tine Spring into the cutout as shown on the left. Push the Tine Spring towards the center of the Spool until it locks into the slot. Slide the Tine into the Tine Spring. Secure with pins as shown. Rotate each Spool and verify that all 40 Tines are pointed in the same direction as shown.
  • Page 7 Operating Instructions Before Using Lawn Aerator: Apply grease to wheels using grease gun until grease can be seen squeezing out from both sides of the wheel. Check tire pressure and inflate to 24 psi if needed. Read all Safety Rules found on page 2. How to Aerate Lawn: Mow lawn and remove loose clippings.
  • Page 8 This warranty applies only while this product is in use in the United States. In the space below record the purchase date of your Lawn Aerator. 48CP Model Number Purchase Date Keep this Owner's Manual and your receipt in a safe place for future reference.
  • Page 9 Repair Parts 32 & 33 OSI Decal Replacment Parts Ordering OHIO STEEL INDUSTRIES 1-800-652-2321...
  • Page 10 DESIGNED AND TESTED IN COLUMBUS, OHIO MANUFACTURED IN THE U.S.A FROM DOMESTIC AND IMPORTED COMPONENTS MODEL # 48CP 2575 Ferris Road Columbus, OH 43224 (800) 652-2321 www.ohiosteel.com (800 652-2321...