Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2016 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 16f
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Portland 63190
Summary of Contents for Portland 63190
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 This design is referred to as double-insulated, indicated by Page 2 For technical questions, please call 1-800-444-3353. Item 63190...
-
Page 3: Personal Safety
Check for alignment of moving parts, binding of 6. Do Not Force Appliance - It will do the job better and with less likelihood of injury at the rate for which it was designed. Item 63190 For technical questions, please call 1-800-444-3353. Page 3... -
Page 4: General Safety
7. Do not operate pole Saw from within a tree. the Pole Saw will reduce the likelihood of Operation of tool while up in a tree accidental contact with the moving saw chain. may result in personal injury. Page 4 For technical questions, please call 1-800-444-3353. Item 63190... -
Page 5: Specifications
8", Sprocket Nose, Low Kickback Oregon #16 Gauge: 0.063" Saw Chain Pitch: 0.404 Lubrication: Bar and chain oil (sold separately) If not available, SAE 30W motor oil may be used 3092405 Item 63190 For technical questions, please call 1-800-444-3353. Page 5... - Page 6 Parts List and Diagram on page 14. Functions Guide chain chain cover Oil Level Gauge Oil Filler Drive cover Extension collar Hex Wrench/Screwdriver cord Trigger clip Safety Lock cord clip Access Trigger Hole Page 6 For technical questions, please call 1-800-444-3353. Item 63190...
-
Page 7: Assembly
Guide Bar’s groove, making sure chain is 8. Tension Saw Chain according to Tension installed in correct rotation direction. Saw chain on page 8. Rotation Direction Guide Drive Groove Link Symbol Item 63190 For technical questions, please call 1-800-444-3353. Page 7... -
Page 8: Operation
Adjust pole Saw Length Loosen Extension Collar, extend pole to desired WARNING! To prevent serious injury, length, then tighten Extension Collar securely. check Extension collar for tightness periodically during use. Extension collar Page 8 For technical questions, please call 1-800-444-3353. Item 63190... - Page 9 Position the cord so that it will not be caught on branches and the like during cutting. cord clip 4. There must not be objects, such as utility lines, nearby that will present a hazard while working. Item 63190 For technical questions, please call 1-800-444-3353. Page 9...
- Page 10 8. Do not force Pole Saw, let Pole Saw do the work. 3. Make sure Automatic Oiler is distributing oil. 9. Remove the Pole Saw from a cut while it is running. Page 10 For technical questions, please call 1-800-444-3353. Item 63190...
- Page 11 1/3 way into branch. f. Make fourth cut from top, severing branch. 10. When finished, release Trigger and unplug from outlet. 11. Clean, then store according to cleaning, Maintenance and Lubrication on page Item 63190 For technical questions, please call 1-800-444-3353. Page 11...
-
Page 12: Maintenance
Store Pole Saw in a dry, secure location away from children. WARNING! If the supply cord of this appliance is damaged, it must be replaced only by a qualified service technician. Page 12 For technical questions, please call 1-800-444-3353. Item 63190... - Page 13 Guide Bar is worn and needs to be replaced. Saw Chain. If there is a gap, the bar is normal. Tilting Saw chain Ruler chain Ruler Rail Worn Guide bar Straight Guide bar Item 63190 For technical questions, please call 1-800-444-3353. Page 13...
-
Page 14: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-800-444-3353. Item 63190... -
Page 15: Assembly Diagram
Assembly Diagram Item 63190 For technical questions, please call 1-800-444-3353. Page 15... -
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 63190 and is the answer not in the manual?
Questions and answers
I lost the tension adjustment screw. how can I rep[ace it?
Is there a oil tank gasket for Portland pole saw 62896