Adding A Stopover - Samsung YP-N1 User Manual

ADDING A STOPOVER

You can add a stopover between the start point and the destination.
1. When the navigation route is set, select a
stopover by tapping on or dragging it.
You will see a map on the screen.
2. Tap "Add Via" button.
The stopover is marked with a white fl ag and the
navigation route is recalculated.
You can add stopovers on and on.
REMOVING A STOPOVER
You can delete a start point, destination or stopover.
1. Select a stopover to delete on the map.
2. Tap "Remove Via" button.
The selected stopover is removed.
CHANGING THE FINAL DESTINATION
You can change a fi nal destination.
1. When the navigation route is set, select a fi nal destination by tapping on or
dragging it.
2. Tap "Continued" button.
The initial destination is changed to a stopover and marked with a white fl ag.
The fi nal destination is marked with a red fl ag.
using the navigation _ 43