Maintenance Schedule - Genex SG7600EX Owner's Manual

Sg series (dx/ex)
Table of Contents

Advertisement

Periodic maintenance and adjustment is necessary to keep the generator in good
operating condition. Perform the service and inspection at the intervals shown in
the Maintenance schedule below.
off the engine before performing any maintenance. If the engine must be run,
make sure the area is well ventilated.
Use only genuine GENEX parts or their equivalent for
maintenance or repair. Replacement parts which are not of equivalent
quality may damage the generator.

Maintenance Schedule

REGULAR SERVICE PERIOD
Perform at every indicated month or
operating hour interval, whichever
comes first.
ITEM
Engine oil
Air cleaner
Fuel sediment cup
Spark plug
Valve clearance
Fuel tank & strainer
Fuel line
(1) Service more frequency when used in dusty areas.
(2) These items should be serviced by an authorized GENEX generator dealer,
unless the owner has the proper tools and is mechanically proficient. See the
GENEX Shop Manual.
(3) For professional commercial use, log hours of operation to determine proper
maintenance intervals.
Exhaust gas contains poisonous carbon monoxide. Shut
Check level
Change
Check
Clean
Clean
Check-Clean
Check-adjust
Clean
Check (Replace
if necessary)
First
Each
month
use
or
20 hrs.
Every 2 years (2)
21
MAINTENANCE
Every
Every
3 months
6 months
or
or
50 hrs.
100 hrs.
● (1)
Every
year
or
300 hrs.
● (2)
● (2)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sg6500exSg5300exSg7600dxSg3200dxSg6500dxSg5300dx

Table of Contents