tepro ANCHORAGE Operating Manual page 15

Assembly
Unpacking
Danger Risks to children!
While playing,
can become caught in the
packaging film and choke.
– Do not let children play with the
packaging films.
– Make sure that children do not put any
small assembly parts into their mouths.
They could swallow the parts and
choke on them.
• Unpack the device and check it for
completeness.
Assembling the fire pit
Please note:
Assemble the fire pit as shown. All nuts
should be affixed on the inside of the fire
pit.
Firstly, all parts, connecting elements,
screws, and nuts should be loosely
assembled. Once all the parts have been
assembled, tighten all of the screws and
nuts.
Danger! Risk of cutting!
Sheet metal parts can have
sharp corners. Take care during
assembly.
1. Assembling the stand
Join the four side grates using the
screws and domed nuts. Fasten the
screws with the help of the Allen key.
children
2. Inserting the fire bowl
Place the fire bowl on the stand.
Please note:
The surface of the fire pit consists of
genuine rust. On top of this there is
a thin layer of protective paint, which
disappears during pre-firing. This is not a
quality defect; the protective paint serves
to protect the user from dirt and injuries
during assembly of the item.
Important: All screws must be tightly
fastened.
t
15