Summary of Contents for Egasky Saturn R24M Nano
- Page 1 2.4G Station User Guide Version L1.01 Egasky Networks, Inc. - 1 - Copyright 2015-2016 Egasky Networks, Inc.
- Page 2 IP address to your PC which should be in the same network segment with this CPE. This CPE default IP address is 192.168.188.253, you may choose from 192.168.188.*. Then click OK. - 2 - Copyright 2015-2016 Egasky Networks, Inc.
- Page 3 Default id: “admin” ; Password: “admin”; Enter click Login. If engineer debugging the device for you, please refer to the nameplate. log-in CPE. Select English; a. CPE operating mode Point to point transmission mode： Point to multipoint transmission mode： - 3 - Copyright 2015-2016 Egasky Networks, Inc.
- Page 4 AP mode b-1、Choose “Wireless Coverage”，Set SSID, Channel, Authentication , Key ;Click “Apply”； b-2、 Change CPE ip address, Select Advanced Settings, Network> Lan Settings> IP Setting; Select "Static IP", Set new ip Click "Apply"； - 4 - Copyright 2015-2016 Egasky Networks, Inc.
- Page 5 CPE reboot, Click “Device Status”, View Status AP mode setting is completed, remains active. C. Client mode c-1、Login Second CPE，Choose “Wireless Repeater”，Click “Scan AP”； - 5 - Copyright 2015-2016 Egasky Networks, Inc.
- Page 6 SSID； c-3、Set Key, Click "Apply"; c-4、Wait CPE reboot, Click “Device Status”, View Status - 6 - Copyright 2015-2016 Egasky Networks, Inc.
- Page 7 Disable repeater mode, Select “Advanced Settings”, Wireless> Basic Settings, Set Disable; Click "Apply"; Ping AP ip address to verify communication. - 7 - Copyright 2015-2016 Egasky Networks, Inc.
- Page 8 CPE, the completion of initialization. ▅ Wireless parameter setting, install multiple sets of bridge at the same location, long-distance transmission, enhance the transmission rate is very important. For more details, please contact optimization engineer. - 8 - Copyright 2015-2016 Egasky Networks, Inc.
Need help?
Do you have a question about the Saturn R24M Nano and is the answer not in the manual?
Questions and answers