Fyver Watch User Manual

User Manual

Quick Start Guide

Use this quick start guide to understand the basic interaction with the Fyver Watch. You can
read more in detail in later sections.
Please check that in the box there is a
a) Watch
b) Screwdriver
c) Charging dock
d) Cable
Attention: If there is anything missing, immediately contact info@fyver.io.
1. Charge the watch for 2-3 minutes. The pins on the dock should match to the pins on
the watch. The circular cut on the dock should match the watch button. Plug in the
dock to the cable, and plug in the cable to an adapter (not included).
2. Hold down the watch button. The watch will now start up, showing FYVER.
3. Follow the set up instructions. There is no need to scan the QR code right now.
4. Congratulations! You have started your Fyver Watch.
Other Setup
1. On the watch screen, swipe to the right. Scroll down to the Settings app. Open it.
2. Scroll, and click Connect, then WiFi. You can now select a WiFi network.
SIM Card
1. If you choose to have a SIM card, you may make phone calls from the watch. First,
shut down the watch.
2. Next, use the screwdriver to unscrew the back.
3. There is a metal clasp on the circuit board. Push it back, and lift.
4. Now you may insert any SIM card with GSM network. Contact your network provider
for GSM availability.
Need help? Contact us anytime at info@fyver.io