Page 1
USER MANUAL CAMPLEX FIBERGIG 2-Channel Bidirectional GigaBit Ethernet Fiber Optic Transport CMX-FG700—opticalCON Quad I/O CMX-FG750—ST Fiber I/O...
Page 2
Fiber Optic Transport The Camplex FIBERGIG CMX‐FG700 is 2 separate 1GIGe Ethernet to fiber me‐ dia converters in convenient 1RU rack mount cabinets. Each channel is a Gig‐ bit Ethernet over a singlemode fiber op c data transport system in a rack‐...
Page 3
Ethernets out of the box, combinable if desired] Black anodized aluminum housing Rugged Neutrik/Senko connectors CMX‐FG550 2 Ch 3G‐SDI, CMX‐FG500 2 Ch 3G‐SDI, CMX‐FG650 2 Ch 3G‐SDI & GIG‐E, CMX‐FG600 2 Ch 3G‐SDI & GIG‐E, CMX‐FG750 CMX‐FG700 2 Ch GIG‐E, Camplex FiberGig Series...
CMX‐FG700/750 Transmi er & Receiver 11 AC Power Input 2A/110‐240VAC 50/60Hz CMX-FG700/750 Set Up Instructions 1. Secure the units in a safe loca on, where they will not be subject to im‐ pact and where there is room around the unit so nothing will interfere with the fiber op c cabling causing it to bend sharply in a ght radius in...
Page 7
* CLEAN: All fiber op cal cable contacts (the end that is inserted and makes contact to enable light wave transmission through the fiber) require cleaning each me before inser ng into a device’s outputs or inputs. Failure to clean the contacts can damage the unit’s op cs over me and also render the cable and the device nonopera onal.
10. There are no user‐serviceable parts inside the unit. If the unit re‐ quires service contact your authorized dealer, or an authorized repair service company. Camplex 812 Kings Highway Sauger es, NY 12477 ...