Advertisement
Water and Dust
If water or dust enters device, it may cause damage to the device. Strictly follow the instructions in
order to prevent damage to the device and to keep the device water-proof and dust-proof.
Do not submerge the device under water over 1 meter deep for more than 30 minutes.
Do not expose the device to high-pressure water such as waves or waterfalls.
If the device or your hand is damp, dry your device or your hand before using the device.
Do not subject your device to saline water, ionized water, or soapy water.
Resistance to water and dust may be impaired if the device is dropped on hard surface or otherwise
impacted.
If the device becomes wet, dry it with a clean, soft cloth.
Your device has been tested in controlled environments, and has demonstrated water-resistance in given
environments (conforms to international standards IEC 60529 - the protection level provided by the seal
[defense grade] meets the requirements of type IP67); test conditions: 15°C - 35°C, 86 – 106 kPa, 1m,
30 minutes continuously). Although the device has met these requirements, this does not mean your
device is water-proof under any condition.
5
Advertisement
