Advertisement
Quick Links
Ultra HD 4K HDMI Extender over IP / Fiber, with POE
Operating Instructions
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual for
future reference.
FEATURES
Support TCP/IP protocol.
Support HDMI resolution up to 4Kx2K@30Hz.
Support 3D.
Support Dolby True HD, DTS-HD Master Audio, LPCM 2 channel audio.
Support transmission distance 120m over single Cat5e/6 cable.
Support Fiber optical up to 60KM (Single Mode).
Build-in 4 bit DIP Switch to select 16 Group ID.
Support One to One, One to Many, Many to Many connection.
10-Gigabit IGMP Ethernet Switch can be cascaded for many layers.
Support Bi-Directional Wide Band IR (38KHZ-56KHZ)
Support POE, no need power supply when connect with POE IGMP Switch.
NOTICE
Our company reserves the right to make changes in the hardware, packaging and any accompanying
documentation without prior written notice.
1
Operating Instructions
Advertisement
Summary of Contents for Gbxpoint SX-EP27
-
Page 1: Operating Instructions
Operating Instructions Ultra HD 4K HDMI Extender over IP / Fiber, with POE Operating Instructions Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. - Page 2 Operating Instructions TABLE OF CONTENTS Speci cations Package Contents Panel Descriptions Connecting and Operating Typical Application Maintenance Product Service Warranty SPECIFICATIONS Operating Temperature Range -5 to +35 (+23 to +95 ) ℃ ℃ Operating Humidity Range 5 to 90%RH (No Condensation) Support Video Format DTV/HDTV:480i/576i/480P/576P/720P/1080i/1080P/4K@30Hz Transmitter: 1x HDMI ( Female Type A );...
- Page 3 Operating Instructions PANEL DESCRIPTIONS Transmitter Panel ① Power input port ② Power input indicator (Red) ③IR-TX port ④ IR-RX port ⑤ HDMI input ⑥ Ethernet port ⑦ Fiber Out ⑧Indicator of status ⑨ 4 bit Dip switch ⑩ Group Switch A.
- Page 4 Operating Instructions Receiver Panel ① Power input port ② Power input indicator (Red) ③IR-TX port ④ IR-RX port ⑤ HDMI Output ⑥ Ethernet port ⑦ Fiber In ⑧Indicator of status ⑨ 4 bit Dip switch ⑩ Group Switch A. Green LED: Link LED, when the connection has established over Cat5e/6 cable or Fiber cable, the Green LED will illuminate.
- Page 5 Operating Instructions Application 1: Point to point configuration: 1. Connect one HDMI Cable between the HDMI source and the HDMI input port of Transmitter. 2. Connect one HDMI Cable between the HDMI display and the HDMI output port of Receiver. 3.
- Page 6 Operating Instructions Application 3: Many to Many network configuration: 1. Connect one HDMI Cable between the HDMI source and the HDMI input port of Transmitter. 2. Connect one HDMI Cable between the HDMI display and the HDMI output port of Receiver. 3.
- Page 7 Operating Instructions When you set up the group ID for each transmitter just like this: TX1 (0001) TX2 (0101) TX3 (0100) Now, If you need display Source2 on TV1, then just set Group ID of RX1 0101, same as TX2: 0101 (refer to Diagram).
- Page 8 Operating Instructions WARRANTY If your product does not work properly because of a defect in materials or workmanship, our Company (referred to as "the warrantor" ) will, for the length of the period indicated as below, (Parts(2)Year, Labor(90) Days) which starts with the date of original purchase ("Limited Warranty period"), at its option either(a) repair your product with new or refurbished parts, or (b) replace it with a new of a refurbished product.