Advertisement
MZ‐4.433
2: REPLACING BATTERY
2.1: Opening the case
Before opening the case, the screw at the back of the case must be
removed.
After removal, proceed as follows:
Lift the cover slightly and slide the cover backwards so that the brackets
are released from the top. (1)
If the brackets are free from the top, the cover can be lifted. (2)
Note that the lifting is not forced to prevent breaking of the brackets.
To close the case, proceed vice versa.
2.2: Replacing Battery
The battery is a 3V Lithium battery type CR2032.
Replace the battery with the same type.
The old battery can simply extended from beneath the clip.
Note the (+) faces upwards when inserting the new battery.
Detecto Command Systems B.V.
Page 4
Advertisement
