Page 1
Revision 1.0 August 1, 2016 FLUOROTEK 200 Handheld Fluorometer Instruction Manual ATTENTION: You Must Read This Manual before Using AccuStrata, Inc. Parklawn Business Park 11900 Parklawn Dr., Suite 203 Rockville MD 20852 (240) 223-5400 www.accustrata.com...
Page 2
Positioning Samples ........................4 3.3. General Data Acquisition Instructions ..................5 3.4. Reviewing Data ..........................7 3.4.1. Review Data on Fluorotek 200 ....................7 3.4.2. Review Data with PC Software ....................7 Software ..............................7 4.1. System Requirements ....................... 7 4.2.
1. Introduction 1.1. Description The Fluorotek 200 is a small form factor handheld fluorometer that is optimally designed for use in the detection of bacteria. Dual channel design allows users to test for a variety of bacteria using various assays.
2.1. Instrument Power Up To turn on the Fluorotek 200, toggle the power switch on the top right side of the unit to the left. To turn the unit off, toggle the power switch right. If the Fluorotek 200 is left on for more than 30 minutes, the unit will power off automatically.
This is due to inconsistency in quality of the polymer test tube. For proper use, ensure that the tab of the tube is oriented the same way for every measurement. P a g e AccuStrata Fluorotek 200 User’s Manual...
To reset the blank value to zero, use the Return button to load the CREEN Once the sample has been blanked, a measurement can be taken using the Measurement button. This button will initialize the followed by the ESTING CREEN ESULTS CREEN P a g e AccuStrata Fluorotek 200 User’s Manual...
Page 7
The values can also be reviewed on the system itself. P a g e AccuStrata Fluorotek 200 User’s Manual...
3.4. Reviewing Data 3.4.1. Review Data on Fluorotek 200 To review data that has been saved to the Fluorotek 200, press the Data button on the . This will display the . Select the wavelength that the data to be...
Page 9
Accept the installation Press the Next> button Choose the file system location to install the software Choose the location on the Start Menu to place a shortcut to the software P a g e AccuStrata Fluorotek 200 User’s Manual...
Page 10
Review your installation selections and press Install A setup menu will appear asking if you would like to install the USB Drivers for the Fluorotek 200. These drivers are required to successfully communicate with the Fluorotek 200. Select Yes to proceed.
Q: After double clicking the installer, a message appears saying that I need elevated privileges. Why? Some versions of windows require elevated privileges to install. To install with elevated privileges, right click on the installer and select Run as Administrator: 10 | P a g e AccuStrata Fluorotek 200 User’s Manual...
Port Refresh- This button updates the available communication ports. This can be used to rediscover the Fluorotek 200 unit in the event that it is connected to the computer after the application is launched.
AccuStrata to any third party, without the express written consent of AccuStrata to do otherwise. Any violation of this provision shall give rise to an indemnification of AccuStrata by you, for any third party claims arising out of such violation.
Page 15
MODIFICATION OF TERMS AND CONDITIONS: AccuStrata reserves the right to change the terms, conditions, and notices under which their products are offered. 14 | P a g e AccuStrata Fluorotek 200 User’s Manual...
Page 16
15 | P a g e AccuStrata Fluorotek 200 User’s Manual...
Need help?
Do you have a question about the FLUOROTEK 200 and is the answer not in the manual?
Questions and answers