Subscribe to Our Youtube Channel
Summary of Contents for Comelit IPKYB100A
- Page 1 IP KEYBOARD FOR IPPTZ CAMERAS 100-700 SERIES ART. IPKYB100A Please read this manual thoroughly before use and keep it for future reference...
- Page 2 INDEX Overview ........................3 Features ........................3 Technical Specification ....................3 Package Contents ......................3 1. Appearance ......................4 1.1 Front panel and function keys introduction ............4 1.2 Rear panel interface introduction ................4 2. Function & operation ....................5 2.1 Connection ......................
-
Page 3: Overview
1 channel video display, support encode up to 1080p Auto searching connected devices in the same network segment Shortcut keys for dome control, setting and recall of Preset, tour and pattern Technical Specification Model Name IPKYB100A Control Mode Network Controllable Device Network High Speed Dome, network PTZ Screen display 5"... -
Page 4: Appearance
1. Appearance 1.1 Front panel and function keys introduction Fig.1 1.2 Rear panel interface introduction Fig.2 ① Input power: DC12V/2A ② Reserved output interface: RS485 (not available now) ③ Power indicator ④ USB interface: available to connect the mouse ⑤ RJ45: for LAN ⑥... -
Page 5: Function & Operation
2. Function & Operation 2.1 Connection Fig.3 As Fig.3 show, make sure the keyboard in the same LAN with the devices. Remark: The keyboard supports up to 255 device in each network segment. 2.2 Power on and add device 2.2.1 User management Login After power on 60 s, the screen will display the Login interface as below：... -
Page 6: Add Device
Fig.5 You can change the password or you can create operator and password. Remark: after create the operator, it can not modified the operator name. 2.2.2 Add device After login, the keyboard will search the IP device and assign a Dome ID for each device automatically, as below picture (Fig.6) shows. - Page 7 Fig.7 Move the cursor to choose the “device management” and click “Enter” to enter the sub-menu, select “Search and Add” to confirm. Move the cursor to select ”search” and click “Enter”, then the keyboard will search and add the device automatically. Select the IP address which device need to access, press ”Enter”...
-
Page 8: Ptz Control And Image Switching
2.3 PTZ control and image switching 2.3.1 Device switching As the above fig. 6 show, the user could switch Dome by the corresponding Dome ID which is on the left of IP address list. Press button and No. of the corresponding Dome ID then button . -
Page 9: Preset Operation Instruction
【Addr】: [Addr]+ID number+[Enter] to choose the corresponding IP address. 【0】～【9】: Number keys [0], [1], [2], [3], [4], [5], [6], [7], [8], [9]. 【Clear】: [Clear]+number+[Enter] to delete the Preset point. 【Enter】: Confirm key, to confirm the present operation. 【Aux ON】: Aux ON. 【Aux OFF】: Aux OFF. -
Page 10: Shortcut Command
The following are shortcut commands for the speed dome, please press the Preset key, the No. key +Enter to enable the functions: Preset No. Function Preset No. Function Auto Day/Night Force on Far Light Switch to Night Force on Near Light Switch to Day A-B Scan Tour 1... -
Page 11: Factory Default
2.8 Factory default To enable the factory default, user just need to enter menu, choose” Default config” Fig.10 2.9 IP address The Default IP address of the keyboard is “192.168.1.2” To be sure the controller and dome connected work properly, please make sure they are in the same network segment, but not same address. -
Page 12: Troubleshooting
3.0 Troubleshooting Issue Possible Reason Solution IP address segment of the IP Change either IP address of Can’t add the Camera camera and controller is not the keyboard or IP address of same camera 1. The command is inconsistent 1. Check the dome manual, with dome connected make sure the right command Can’t run the Tour...
Need help?
Do you have a question about the IPKYB100A and is the answer not in the manual?
Questions and answers