Sigmacom WiViEW WMT-1000I User Manual

Hide thumbs

page of 60

/ 60
Bookmarks

Quick Links

Download this manual

WiViEW

WMT-1000I

WMT-1000O

USER'S MANUAL

Version 1.0

Notice

This device has been approved by FCC for a home

appliance and is suitable for all residential areas.

All trademarks are the properties of their respective owner.

The information contained herein is subjected to change without notice.

Need help?

Do you have a question about the WiViEW WMT-1000I and is the answer not in the manual?

Questions and answers

Summary of Contents for Sigmacom WiViEW WMT-1000I

Page 1 This device has been approved by FCC for a home appliance and is suitable for all residential areas. © 2006 Copyright SIGMACOM CO., LTD. All right reserved All trademarks are the properties of their respective owner. The information contained herein is subjected to change without notice.
Page 2 WMT-1000O Specification ■ Power Supply Adaptor IN: 100-240V~50/60Hz 0.5A OUT: 12V, DC 1.25A ■ Power Consumption : 2.5mW/MHz ■ Digital Modulation : OFDM ■ Channel 3Channel (5180MHz, 5200MHz, 5220MHz), BAND WIDTH : 20MHz ■ VIDEO OUTPUT : Composite, S-Video, Component (480i) ■...
Page 3 WMT-1000I Specification ■ Power Supply Adaptor IN: 100-240V~50/60Hz 0.5A OUT: 12V, DC 1.25A ■ Power Consumption : 2.5mW/MHz ■ Digital Modulation : OFDM ■ Channel 3Channel (5180MHz, 5200MHz, 5220MHz), BAND WIDTH : 20MHz ■ VIDEO INPUT : Composite, S-Video, Component (480i, 480p, 720p, 1080i) ■...
Page 4 Overview of WiVIEW Safety notice and Warning Restricted to indoor use. FCC notice to users and product statements THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 5 European CE notice to users and product statements This product is CE marked according to the provisions of the R & TTE Directive (99/5/EC). Hereby, Sigmacom Co., Ltd declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information, please contact http://www.sigmacom.co.kr/eng/main/...
Page 6: Additional Functions
Hardware Installation Connecting Wi-VIEW Connecting to WMT-1000I of Wi-VIEW - Connecting satellite receiver or cable TV receiver - Connecting VCR - Connecting DVD Player or Game console - Using the remote control of external video device Connecting to WMT-1000O of Wi-VIEW - Connecting analog TV set - Connecting HDTV Ready set Main functions...
Page 7 3) Picture 4) Video 5) DVD 6) Radio 7) Setup - Standard setting - TV setting - File setting - Multimedia setting...
Page 8 Accessories Thank you for purchasing the Wi-VIEW. When removing the package, make sure that the following contents are included. If you find any missing part, please contact our near dealer or distributor. Holder – 2EA WMT-1000I - 1 EA WMT-1000O Remote control - 1 EA Sound(2RCA) cable...
Page 9 Part name Front POWER Network < Server Input> < client Output> WMT-1000I WMT-1000O IR: The status of remote control receiver Power: The status of Power Power: The status of Power Network : The status of wireless connection Network : The status of wireless connection Reset : Used for reboot Reset : Used for reboot...
Page 10 * Back WMT-1000I DC-In: Used for Power In Power button: Used for power on Video In(S-VIDEO&CVBS): Used for receiving video signal (S-VIDEO, COMPOSITE) from external devices. Sound In: Used for receiving audio signal(S-VIDEO, COMPOSITE) from external devices. Video In (Component): Used for receiving video signal (COMPONENT) from external devices. Sound In: Used for receiving audio signal (COMPONENT) from external devices.
Page 11 Using remote control * Wi-VIEW control WiVIEW control button. PC (SMC) Control Button Power On/Off External Source Input Selection Client ID set-up (see page 21) Arrow keys for up/down Left/right direction MENU selection Back/Previous MENU.
Page 12 * SMC (Sigma Multimedia Center) control SMC On/Off Input Channel File Mode Change Numeric Button Channel Volume up/down up/down Mute Previous Channel/ TAB Favorite Channel Control cursor selection /TAB the Main MENU/enter Home/Menu Back/Previous Record Movie Play/Pause Forward Backward Next Track Previous Track Stop Sleep Timer...
Page 13 * Inserting Batteries in the Remote control <Open the cover> <Insert batteries > 1. Open the battery cover.(see the above figure) 2. Insert two AAA-size batteries (1.5V) into the battery compartment by matching + and – 3. Close the cover and push the latch back to lock the cover.
Page 14 Placing Wi-VIEW on the stand The figure below is to place the Wi-VIEW in standing position. Put the Wi-VIEW into the holder. Fix the position by matching two wholes on the bottom.
Page 15 Installation Connecting the Wi-VIEW You can connect the Wi-VIEW to external devices such as VCR, DVD and game console. * Connecting WMT-1000I diagram Remote control Power External device Adapter Satellite receiver DVD Player Cable box Game console * Connecting WMT-1000O diagram Power Adapter HDTV Ready...
Page 16 Connecting Server(Input) ◆ Connecting to Satellite receiver or cable TV receiver . Video connection You should connect Video out (composite/Yellow) of a satellite receiver or cable TV receiver to Video In (CVBS port) of the Wi-VIEW with the composite cable. (Yellow). .
Page 17 . Video connection 1. You should connect Video out (Yellow) of a VCR to Video In (CVBS) of the Wi-VIEW with the composite cable (Yellow). 2. For S-VIDEO connection, you should connect S-VIEO out of a VCR to Video In (S-VIDEO) of the Wi- VIEW with the S-VIDEO cable.
Page 18 ◆ Connecting DVD Player & Game console Video connection You should connect Component In (YPbPr) of the WI-VIEW to Component out of a DVD player or Game console with the component cable(R/G/B). Audio connection You should connect Composite In(White/Red) of the Wi-VIEW to Composite out of a DVD player or Game console with the composite cable.
Page 19 ◆ Using the remote control of an external video device . When using with PCs You should connect the USB port of PC to the Wi-VIEW(server) with the USB cable. USB cable . When using with external video devices Connect IR blaster as shown below. Remove the sticker of IR blaster cable and attach it to the remote control receiver of external video device.
Page 20 Connecting Client(output) ◆ Connecting analog TV . Video connection You should connect Composite (CVBS) or S-Video of the WIVIEW to an available input of a TV set with an appropriate cable. . Audio connection You should connect Audio out of the WIVIEW to Audio In(White/Red) with the composite cable. Composite cable (White/Red) Audio In...
Page 21 ◆ Connecting HDTV Ready 1. Use the composite connection with WIVIEW and HDTV ready TV set. 2. Use the composite cable(white/red) for audio connections. Component(YPbPr) In (Green/Blue/Red) Audio In (White/Red) Component cable (Green/Blue/Red) Composite cable(White/Red)
Page 22 Basic functions Using the remote control on the menu ◆ Button descriptions . SOURCE [figure]: Used for calling or quitting the menu screen. . BACK/ESC [figure]: Used for going back to the previous step. . Up/down [figure] : Used for going up and down from the menu screen. .
Page 23 Starting the WiVIEW When pressing the power on the remote control, the following ID information is displayed Note . To change ‘Input’ ID, refer to ~ page. . Keep 3M away from the server and client system.
Page 24 Server (input) setup This function is to set connections with the server and external video devices. (DVD player or PC) Press SOURCE[ ] on the remote control, then Setup Menu appears. Select “Input Selection” Select an available input, then press [...
Page 25 Client (Output) setup This function is to set connections with the client and display devices (TV or monitor). Press “SOURCE”[ ]’ on the remote control, then “Setup Menu” appears. Select “Analog Output” Select an available input‘, then press [...
Page 26 Quality control This function is to adjust the image quality on the TV screen. Press ‘SOURCE[ ]’ then “Setup Menu” appears. Select “Picture” 3. Select one of the Contrast, Luminance, Saturation, Sharpness and Hue. 4. Press [ ] then adjust the color value using [◀/▶]. Note Above pictures are the examples when selecting [Contrast].
Page 27 OSD language This function is to select OSD menu language. Press ‘SOURCE [ ]’ on the remote control, then “Setup Menu” appears. Select “Language” 3. Select OSD menu language, then OK [...
Page 28 Miscellaneous This function is to show basic information on firmware version, server ID, EEPROM, screen saver, and network status. 1. Press[ ]’ on the remote control. 2. ‘Setup Menu’ appears then select [Miscellaneous] . Checking Wi-VIEW information Information on firmware versions of MPEG Decoder, Wireless Chip, Mpeg Encoder, and Wireless Chip can be checked as below.
Page 29 Notice MPEG decoder version for server Xcode MPEG encoder version for client M2Svr Wireless Chip version for server M2Clt Wireless Chip version for client...
Page 30 . Setting Screen Saver This function is to show a screen saver on the black screen when external video devices are not connected. This is useful when you do not know whether the server and client are activated or not. 1.
Page 31 . Checking the network status This shows Client RSSI, Server RSSI, RF channel, RF frequency and stream bit rate. 1. Select “Network Status.” 2. Press [ ] then appropriate information appears.
Page 32 Chapter 4. Using SMC(Sigma Multimedia Center) SMC is an entertainment tool to be used to watch DVD/TV, listen to music, and view the digital photos. This can be a unified easy control panel for all complicated interface buttons. ◆ Main menu screen Main menu Windows menu Search menu(control panel)
Page 33 ], Multimedia Config[ These functions are used to set configuration for TV, file play or multimedia control. . Go to SIGMACOM home page[ This function is to go to SIGMACOM web site. ■ Windows menu . Help[ ]: shows program information on SMC.
Page 34 ■ Search menu .Play/Pause[ ] : plays or pauses video(TV, video, DVD) or music files. .Stop[ ] : stops video(TV, video, DVD) or music files. .Record[ ] : records a watching scene as a file. (This function is possible when TV menu has been selected.) .Rewind/Fast Forward[ ]: go backward or forward a video on play.
Page 35 ◆ Watching PC contents(video, music, picture) thru WiVIEW This function is to view video files as album or file more conveniently. In using media (video, music, picture)menu, files should be registered in book mark. 1. Select a media (video music and picture to be used in the main menu.
Page 36 ■ Menu .Search files[ ] : scans media files(video, music, picture) .Mode change[ ] : switches to Search mode or Edit mode .Show the playlist[ ] : shows media file list(video, music, picture) .Configuration[ ] : shows configuration to set SMBM ■...
Page 37 ■ File list Used to select or release all media files Used to move, register or delete a selected file Used to select media files(video, music, picture) Used to arrange or mark media files Used to store configuration setup Used show scanned media files...
Page 38 ■ Scanning files Select a folder to scan in the folder window. When pressing ‘File search[ ]’ , scanned files appear in the file list. After selecting a file to register,, press ‘file save[ ]’. ② ③ ① 4. A message that album setting has been changed appears then press OK. Note In ‘Search mode’, the title color is changed to orange.
Page 39 5. Select an item(drive, extention, library)in the album list then the following message appears.Click YES. 6. It will changed from Search mode to Edit mode and Drive, scanned file extensions, and libraries will be created at the same time. Check-point A wanted file format can be searched only in the book mark.
Page 40 ■ Registering files in the list 1. Select a file to register in the file list then it will be registered in “configuration setup and play list” automatically. 2. Click “file save” to save in the “file list”. 3. Saved files can be checked by clicking ‘Music[ ]’.
Page 41 ◆ SMC function 1) TV function (analog TV/digital TV) This function is used with a TV capture card. If a TV tuner card is not installed in your system, you can not use this function with SMC program. Running the TV program ]’...
Page 42 . Menu Moves to the main screen Shows available programs Pre-schedules to record a TV program Edits(add/delete) channels or favorite channels EPG function Configuration setup for TV programs . Screen window Shows the screen always on the top Iconization of the screen Maximize to full screen Close the screen Shows a selected TV program...
Page 43 Setting antenna This is used to select a TV antenna connection. Select Options in ‘TV Config Select ‘Src&Dev’ and TV antenna. Select an available antenna connection. 4. When moving back to the previous screen by pressing ESC or BACK/ESC, the configuration is saved automatically.
Page 44 Setting TV channel This is used to search available TV channels from the over-the-air or cable and to set channel save/delete or favorite channels Select ‘auto-scan[ ]’ in the menu. ■ Registered channel(channel memory/delete) This shows scanned channel list and it also can be used to add or delete channels. Switches to Favorites Shows channel list Scanned channels are marked in the check-box.
Page 45 Favorite channel ■ This is used to manage favorite TV channels only. . Adding a favorite channel 1 Select Favorite channel’ in ‘Auto-scan[ ]’ menu. 2. Select a favorite channel to be shown in the list then click “favorite channel add”. Switches to Favorite channel Shows favorite channels Adds or delete favorite channels...
Page 46 EPG(Electronic Programming Guide) This function is a TV program guide provided by national TV broadcast service providers. It can be used to record a favorite TV show at a convenient time. When selecting ‘EPG[ ]’, the following program guide window appears. Shows program information EPG search Records the current program...
Page 47 Reservation This is used to record or quit a TV program by pre-schedule system. Select ‘Pre-schedule[ ]’ then pre-schedule list appears. Shows program information to be pre-scheduled.
Page 48 ■ Adding Reservation list This function is to reserve a TV program in advance daily, weekly or b-weekly. Select ‘Add reservation [ ]’ then “Add Reservation” window appears. (Following menu is an example for DTV mode. Note that analog TV mode may have a different menu.) Set a channel to reserve (virtual channel), input mode, frequency, start and stop time.
Page 49 Multi-screen This function can be used in analog TV mode only. Available channels are shown in the multi-channel window in serial. Select ‘channel edit ’ in the menu then the available channels are displayed as below. . Watching one channel Click a channel to view in full screen.
Page 50 2) Music This function is used to play music files (mp3/wav/wma) from HDD or CD-ROM Drive. Note Music files should be registered to use MUSIC function. Refer to page~. 1. Select ‘Movie [ ]’ in the menu then the following Music list appears. Shows registered music files...
Page 51 2. Click “Play checked items” after selecting a music file. Shows the current playing status Shows the name of the music file Note Picture files can be shown while playing if picture files are registered while playing. Refer to page ~ to add files.
Page 52 3) Picture This function is used to see picture files(BMP/GIF/JPEG/JPG/PNG/TIFF) from HDD or CD-ROM Drive. Note Picture files should be registered in the Book Mark to use Picture function. Refer to page ~ for more information. 1. Select ‘Picture [ ]’...
Page 53 ) Movie This function is used to see video files(ASF/AVI/MPEG/MPG/TP/TRP/TP) from HDD or CD-ROM Drive. Note Video files should be registered in Book Mark to use Movie function. Refer to page~ for more . 동영상 파일을 재생하려면 information. Select ‘Movie[ ]’in the menu then the following box appears.
Page 54 Click “Play Checked items” after selecting a video file. Shows the current playing status (The playing position can be changed with the mouse dragging.) Screen window...
Page 55 ) DVD function This function is used to play DVD titles on the DVD-ROM. Insert a DVD title into the DVD-ROM. Click ‘DVD[ ]’ in the menu then it will run automatically. Playing status bar (You can move a playing position by mouse-dragging.) Screen window Note...
Page 56 Step search Scans fine tune Shows saved frequency table Scans available frequencies . Manual input for frequencies 1. Select “input channel” in FM window. 2. Input a channel you want in the input channel window and press Save. Note For FM radio reception, a FM radio card is required to install in your system. Note An antenna is required for fine frequency scan.
Page 57 ) Setting This is used to show configurations for each function(TV/music/file/video/picture). The default set values can be changed. When selecting a function to change, appropriate setup window appears. ■ General setting This is used to set country, time zone and screen size. In addition priority, exit mode, sleep, auto update and startup size can be set.
Page 58 ■ Setting TV This menu is used to set configurations for TV input modes and pre-schedule. Select ‘TV Config[ ]’ in the main menu. Moves to previous menu Shows selected menu Sets to reserve a time for start and quit Sets required values for still image and video capture Sets overlay and screen size Sets TV color values...
Page 59 ■ Setting File configuration This menu is used to set play order, search time duration, aspect ratio and screen size for music and video files. Select ‘File Config[ ]’ in the main menu. Moves to previous menu Shows selected menu Shows info on picture files and sets slide show time Sets aspect ratio and screen size Sets play order and search time duration...
Page 60 ■ Setting Multimedia This menu is used to set configurations for DVD or Digital Camcoder. Select ‘Multimedia Config[ ]’ in the menu. Moves to previous menu Shows selected menu Sets aspect ratio or screen size Sets recording folder, file format and recording time Sets sub-title, audio, angle and closed caption...

This manual is also suitable for:

Wiview wmt-1000o