LG BLUETOOTH HBS-250 User Manual page 3

Description of parts
Front
MUSIC JOG dial
Back
EQ/HOLD button
Volume Control
Wearing
Charging Port
- Check the left/right side of the headset.
- Widen the ear loop a little in order to wear it easily, and wear it
appropriately.
- Adjust the ear loop to fit in your ear if necessary.
4
PWR/CALL button
External sound/
Charging port
MIC
Charging
- Remove the cover on the charging port and connect the charger.
- While charging, the LED will remain on.
- The Headset can not function while charging.
- It takes 2 hours to fully charge the Headset.
- When charging is complete, the LED will turn off.
Low battery
- You will hear a beep tone periodically at low battery.
- When the battery is not charged, the Headset will turn off.
Button Hold
- Button Hold mode prevents any button from being pressed
unintentionally.
- Press and hold EQ/HOLD button for 3 seconds to turn on the mode.
- Press and hold EQ/HOLD button for 3 seconds again to turn off the mode.
- Button Hold mode is available even when HBS-250 is powered-off.
- If you press any button of powered-on Headset in Button Hold mode,
beep and LED alerts notify you of the mode.
- If you try to turn on the Headset in Button Hold mode, beep and LED
alerts notify you of the mode, too. You should turn off the Button Hold
mode first.
Battery status
By pressing briefly the Volume-Up button and Volume-Down button
simultaneously, the battery status can be checked by the number of
LED flashes.
Number of red flashes 4 flashes
Music streaming time More than 7 h More than 4 h More than 1 h Up to 1 h
Power on
- Press and hold the PWR/CALL button for at least 2 seconds.
� The HBS-250 will turn on and a tone will play.
How to use
3 flashes 2 flashes 1 flash
5