Table of Contents
Advertisement
12-MENU ENTRIES AND OPERATION
MAIN MENU
Press key 3 (menu) to access. The options accessed are:
•
Date and Time
•
Timer
•
Sleep (only when stove is on)
•
Settings
•
Info
Date and time configuration
Configure the time and date as follows:
•
Press the "menu" key.
•
Select "Date and Time".
•
Press "menu" to confirm.
•
Scroll through with the arrow keys and select the variables to be edited one at a time: Day, Hour, Min, Num. day, Month, Year.
•
Press "menu" to confirm
•
Use the + and - keys to edit.
•
Finally, press "menu" to confirm and "esc" to exit.
CONFIGURATION OF PROGRAMMED MODE (TIMER) - Main menu
The current time and date must be configured to ensure correct operation of the timer.
There are six configurable TIMERS; for each one, the user can select a start and stop time and the days of the week when it is in use.
When one or more programs are active, the status of the stove and the TIMER "n" alternate on the display. "n" is the number of timer
programs in use, separated by dashes.
Example:
TIMER 1 Timer 1 program active.
TIMER 1-4 Timer 1 and 4 programs active.
TIMER 1-2-3-4-5-6 All timer programs active.
EXAMPLE OF PROGRAMMING
With the stove on or off:
• access the MENU,
• scroll to the TIMER item using the <> arrows,
•
press the "Menu" key
•
the system shows "P1" (Press the <> keys to move through the timers P2, P3, P4, P5, P6)
•
Press the "Menu" key to activate "P1".
•
press + - and select "ON"
•
press the "Menu" key to confirm
At this point the start time is 00:00. Press the + - key to set the start time and press the "menu" key to confirm.
Next, the proposed stop time is 10 minutes later than the configured start time: press the + key and edit the stop time, and press the
"menu" key to confirm.
Next, you are asked to set the days of the week when the configured timer is to be enabled or disabled. Press the - or + keys to select the
day you want to activate the time. It will light up white, then confirm with the "menu" key. If no day is selected for enabling the timer, the
timer program is no longer enabled on the status window.
Next, program the other days or press "ESC" to exit. Repeat this procedure to program the other timers.
EXAMPLES OF PROGRAMMING
6
Advertisement
Table of Contents
