Dear user:
Thank you for choosing our product. Please read this Instruction
Manual carefully before use. If there is anything unclear, please
refer to professional doctor for use or use under his guidance.
Please keep this Instruction Manual well for reference.
This unit is Class IIa Medical Device.
Certificate, Registration & Safe Use Information
General Description
Treatment Mechanism
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
IntendedUse
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
Main Unit
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
Installation
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
Accessories
Safty Information
Laser Power Check
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
Proper Use
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
Maintenance
Product Troubles and Solutions
Technical Parameters
Manners of
Laser Output Wire & Healthcare Eye Massager
Foot & Back Massage Diagram
Popular Acu-points Diagram
R
KANGXING
Helpful Information
Helpful Information
Content
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
... ... ... ... ... ... ... ... ... ... ... ... ... ...
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
... ... ... ... ... ... ... ... ... ... ... ...
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
... ... ... ... ... ... ... ... ... ... ... ...
... ... ... ... ... ... ... ... ... ... ... ... ...
1
... ... ... ... ......
2 3
4
... ... ...
4
5
6
9
15
16
19
19
24
26
27
...
28
29
37
Need help?
Do you have a question about the GX 2000 B and is the answer not in the manual?
Questions and answers
Jedna laserova elektroda nesvieti.pravdepodobne je preruseny kontakt.potreboval by som poradiť alebo vymaniť.mám to už cca 6 rokov.
To fix a non-working electrode on the Laser GX 2000 B due to a possible contact issue:
1. Check if the low-frequency wire plug is inserted well into the electrode or Bandangle. If not, reinsert it properly.
2. Check if the Bandangle plug is inserted well into the socket of the Rubber Mat. Reinsert it if necessary.
3. Ensure the electrodes or Conductive Rubber Mat are in full contact with the skin.
If the problem persists, check the battery power and charge if needed.
This answer is automatically generated