TS KEYPAD User Manual 1.0 Introduction This document details the Physical Access Control Reader uTrust TS KEYPAD and its basic user instruction and installation procedures. 2.0 Reader Functionality TS KEYPAD reader is a physical access control smart card reader that can read HF and LF contactless credentials, conforming to the following standards: ISO 14443 A &...
TS KEYPAD User Manual 3.0 Product details Model Name : uTrust TS keypad Device Type : RFID reader, 13.56MHz (HF) / 125 KHz (LF), keypad Physical Access control Reader (accessory equipment) Type of equipment : Potted Reader, Suitable for Indoor / Controlled Outdoor use...
TS KEYPAD User Manual 6.0 Installation details Parts List • TS Keypad reader -1 • Screws (A #6-18X1.5" SS ) - 4Nos – Back Plate mounting screws for Wall • Snake Eye Screw (SMF #6-32X5/16" SS) – 1 No- Top casing mounting security screw •...
Page 8
TS KEYPAD User Manual Caution: During Wiring make sure that the +VDC lines does not make contact with any other cables, as it might affect reader functionality/ cause damage to the reader. Page 8 of 12...
TS KEYPAD User Manual 6.4 Mounting the Reader 6.4.1 Location of mounting holes on wall Phoenix connector Reader – 4 Holes and 1 Slot 6.4.2 Reader Installation Steps a. Make holes on the wall as per the image above.
TS KEYPAD User Manual Power up and Testing Turn power on The LED blinks 3 times green with a long beep, then turns red Present a card The LED blinks green, and a short Beep is emitted Press Key Buzzer tone &...
—Consult the dealer or an experienced radio/TV technician for help. Information to user Changes or modifications not expressly approved by Identiv could void the user's authority to operate the equipment. This device complies with Industry Canada license-exempt RSS standard(s).