Advertisement
INTRODUCTION
Thank you for buying a Peavey HP2 guitar. This guitar was built by the most skilled
craftsmen and made from the finest materials available. As with all of our musical
equipment, we have built our guitars using a combination of leading edge technology
and traditional handcrafted methods. Ask your Peavey dealer for a full list of other Peavey
musical equipment and accessories.
HP2 GUITAR STANDARD FEATURES
Body
• Figured maple top/basswood back or solid basswood construction
• Unique offset cutaway design with carved top
• Cream or black top-edge binding
Neck
• Birdseye maple neck and fingerboard, oil-finished
• Dual graphite reinforcements and adjustable torsion rod
• 25 1/2" scale length, 22 jumbo frets
• 15" fingerboard radius
• 10 degree tilt-back headstock with 3+3 tuning machine configuration
• Bolt-on construction with contoured neck heel
Electronics
• Two custom wound Peavey humbucking pickups
• Volume and tone controls
• Switchcraft® 3-way toggle switch and output jack
Hardware
• Schaller® tuning machines w/pearloid or cream buttons
• Peavey/Floyd Rose® licensed, double-locking tremolo assembly or tune-o-matic/stop
tailpiece fixed-bridge assembly
• Chrome plated hardware finish
CONSTRUCTION
Body
The body of this instrument is constructed of select hardwoods chosen specifically for
tonal qualities as well as for natural beauty and weight characteristics. The carved top and
offset, asymmetrical body design offer comfort, proper balance and maximum playing
ease. Cream or black edge binding is also added to accent the body.
Neck
The select birdseye maple neck is crafted to provide unmatched rigidity and freedom from
warpage. The single piece neck features a fingerboard cut from the same piece of wood
to keep the color and grain patterns consistent. This stress-relieved lamination also adds
increased stability. Additional strength is provided by the dual graphite reinforcement
Advertisement
