Summary of Contents for MANCHESTER WOOD Mission Side Table
Page 1
Mission Side Table Thank you for purchasing our Mission Side Table. Assembly of this product requires a Phillips screwdriver and a hammer. We have found it helpful to have a second person present in at least one step of the assembly.
Page 2
Read through these instructions thoroughly. We have found this to be of great value when first assembling this product. Remove all parts and hardware from packing material. Place wooden parts on non-abrasive surface (like carpet or carton) to prevent damage to finish. Assembly of this product requires a Phillips screwdriver and a hammer.
Page 3
STEP 2 Attach Front Cleat (F) to Side Assembly (B) using one 1-3/4” screw inserting it through Side Assembly (B) then into the predrilled hole in cleat. STEP 3 Attach Back Stretcher (C) to Side Assembly (B) using two 1-3/4” screws inserting them through the Side Assembly (B) then into the predrilled holes in Back Stretcher (C).
Page 4
STEP 7 Attach Drawer Knob to Drawer (D) by inserting through hole in Drawer (D) and securing with Pan Screw provided. STEP 8 Slide Drawer (D) into cabinet. Attach Drawer Stops to Drawer (D) inserting two 1” #6 screws through Drawer Stop then into predrilled holes in the bottom of Drawer (D).