Summary of Contents for APOINT C-360
- Page 1 APOINT S.R.L. Technical Manual : Apoint Video Conference Camera rev . 10 . 2 (0 1/0 7/2 0 1 7 ) rev.10.2_010717 NexusPub has been realized with technological contribution of www.nexuspub.net...
- Page 2 APOINT VIDEO CONFERENCE CAMERA SECTION Summary APOINT VIDEO CONFERENCE CAMERA GENERAL SAFETY INFORMATION PRELIMINARY INFORMATION TECHNICAL SPECIFICATIONS CONNECTIONS INSTALLATION PRECAUTIONS COMMUNICATION PROTOCOL AND IR CHANNEL SETUP ID ADDRESS SETUP RS485 WIRING DIAGRAM ...
- Page 3 APOINT VIDEO CONFERENCE CAMERA SECTION APOINT VIDEO CONFERENCE CAMERA SD VERSION MODEL C-360 CODE ACNP0026C HD VERSION MODEL 380-K2 CODE ACNP0120C Technical data and contents of this manual are subject to change without notice rev.10.2_010717 NexusPub has been realized with technological contribution of...
-
Page 4: General Safety Information
APOINT VIDEO CONFERENCE CAMERA SECTION General safety information WARNING INDICATIONS FOR USE Read and follow carefully instructions about installation and connection in this manual Do not try to unmount the camera: to avoid risk of electric shock, do not remove any screw or cover;... -
Page 5: Preliminary Information
APOINT VIDEO CONFERENCE CAMERA SECTION Preliminary information The Apoint Video Conference Camera -available in its SD and HD versions- is an indoor PTZ color camera equipped with varifocal lens that allows getting a 10x optical zoom. PTZ control occurs through RS485 with PELCO-D protocol;... -
Page 6: Ir Remote Controller
APOINT VIDEO CONFERENCE CAMERA SECTION HD VERSION MODEL 380-K2 Sensor 1/3” Sony CMOS, 2.1 M 1080P@30, 1080P@25, 1080i@60, 1080i@50, Video Resolutions 720P@60, 720P@50, 720P@30, 720P@25 S/N Ration >50db Focal length f=5-50 mm Zoom Optical zoom 10X Min. Lux 0.1 Lux... -
Page 7: Connections
APOINT VIDEO CONFERENCE CAMERA SECTION Connections SD Camera 1. Composite Video Output 2. IR Receiver 3. VISCA IN connector (not used in NexusPub) 4. VISCA OUT connector (not used in NexusPub) 5. S-Video (provisional) 6. DC IN 12V Connector 7. Terminal for RS-422 and RS-485 HD Camera 1. -
Page 8: Id Address Setup
APOINT VIDEO CONFERENCE CAMERA SECTION HD Camera 1. PIN 1: OFF= baud rate 9600 bps; ON= baud rate 38400 bps 2. PIN 2: OFF= RS-232C; ON= RS-485 3. PIN 3: OFF= VISCA; ON= PELCO-D 4. PIN 4 OFF AND PIN 5 OFF= IR ADD. 0;... -
Page 9: Rs485 Wiring Diagram
APOINT VIDEO CONFERENCE CAMERA SECTION RS-485 wiring diagram The connection between one or more cameras, the Control Station and the optional joystick is sequential with two wires, with the first camera that connects with the second, the second with the third and so on;... -
Page 10: Mounting And Orientation
APOINT VIDEO CONFERENCE CAMERA SECTION Mounting and orientation In this section are reported images and exemplifying schemes for wall, desk / ceiling and tripod mounting; it is recalled that the wall bracket is not available for the HD version of the camera and it may be realized... -
Page 11: Menu Functions List
Premise: some of the voices reported below are not operating or dedicated to the use with VISCA protocol here not explained; furthermore, the Apoint Video Conference camera is predisposed to be used in combination with the Control Station and then is supplied with a configuration dedicated to that use In this section are reported summary tables of the functions present in the menu;... -
Page 12: Save Presets
0~31 Save presets The Apoint Video Conference camera is predisposed to be used in combination with the Control Station and is supplied with a configuration dedicated to that use The only basic operation delegated to the user is the preset creation that can be performed with the following procedure: ... -
Page 13: Common Troubleshooting
APOINT VIDEO CONFERENCE CAMERA SECTION Common troubleshooting PROBLEM POSSIBILE CAUSES SOLUTIONS Communication protocol NexusPub Video Controller is not Alter protocols for consistency consistent with camera’s one Correct functioning test Baud rate set in NexusPub Video at boot, but the Controller is not consistent with...
Need help?
Do you have a question about the C-360 and is the answer not in the manual?
Questions and answers