Page 2
Table of content Introduction Intended use of the Zortrax DSS Station General Safety Information Health and Safety at Work Electrical Safety Mechanical Safety Risk of Burns Warning and Safety Labels on Zortrax Devices Safe Storage and Transport Guidance Electromagnetic Compatibility (EMC) What’s in the Box...
To prevent any inadvertent use, keep the device out of reach of children and ani- mals. It is forbidden to shake or drop the Zortrax DSS station as it may cause breakdowns. The equipment is not intended for use in a potentially explosive environment.
Mechanical Safety The Zortrax DSS station has a movable component in the form of a rotor. Therefore, it is for- bidden to reach into the device or put anything inside the device when it is running, about to start running or at rest.
80⁰ C [176⁰ F]. Do not touch the top cover with bare hands as it may be hot. In order to remove a model from the Zortrax DSS station, use the pliers which are specially adapted for this purpose.
Electromagnetic Compatibility (EMC) Each Zortrax DSS station complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 15
7. Carefully place the basket inside the Zortrax DSS station. 8. Fill up the Zortrax DSS station with warm water. NOTE! Do not fill the Zortrax DSS station all the way to the top. Make sure that the water level is above the model.
Before commencing any repair it is extremely impor- tant to turn off the device and let it cool down. Remember to always wear safety gloves and glasses. The Zortrax DSS station is delivered with a full set of tools needed to carry out maintenance and service work.
Need help?
Do you have a question about the DSS and is the answer not in the manual?
Questions and answers