Advertisement
BEFORE FIRST USE
or
Carefully remove your toaster from its box. Remove
all packaging from inside the toasting slots.
Position your toaster on a stable, secure, dry and
level work surface away from the edge.
Connect the plug to a suitable power outlet and
make sure that the power cord does not overhang
er
the work surface.
When you first use your toaster, there may be a
a
slight odour as the heating elements warm up for
the first time. This is normal and not a cause for
concern. To remove the odour, simply operate your
toaster for the first time without any bread in it.
e
CONTROLS
e
Browning control
The browning control regulates how much the bread
is toasted—in other words, the colour of the toast.
Lower settings produce lighter toast and higher
settings produce darker toast.
When setting the browning control, remember that
m
dry or thin slices of bread will toast quicker and
require a lower setting. Moist or thick slices of bread
ur
will require a higher setting.
Cancel button
The toasting process can be stopped at any time by
pressing the cancel button.
Lift-and-look feature
The lift-and-look feature allows you to check the
progress of the toast without cancelling the toasting
process. Just lift the loading handle up at any
time during toasting and lower it again to resume
toasting. If you find your toast is cooked to your
preference, press the cancel button to stop further
-
toasting (figure 1).
High lift feature
The high lift feature uses the loading handle to
help you to remove the toast. When toasting has
finished, simply lift the loading handle upwards from
its rest position to raise the toast and make it easier
to remove (figure 2).
Frozen bread function
The frozen bread function allows you to toast bread
straight from the freezer. Insert the bread into your
toaster, press the loading handle down and then
press the frozen bread button. Your toaster will
extend the toasting time to allow the bread time to
defrost. Watch the toast to ensure that it doesn't
burn.
Reheat function
The reheat function will heat up toast that has
cooled or gone cold. Press the loading handle down
then press the reheat button. Watch the toast to
ensure that it doesn't burn. Don't use the reheat
function on buttered toast.
USING YOUR TOASTER
1. Set the level of toasting using the browning
control. The higher the number selected, the
darker the toast will be.
2. Place the bread into the toasting slots. Press the
loading handle down until it latches. The bread
will be lowered into the toaster and toasting will
begin.The loading handle will not latch if your toaster
is not connected to the mains supply.
3. Don't forget, you can use the lift-and-look feature
during toasting to check your toast. Simply lift
the loading handle up to examine your toast and
lower it again to resume toasting. If you find your
toast is cooked to your preference, press the
cancel button to stop further toasting.
4. When toasting has finished, the loading handle
will rise and the toasted bread can be removed.
You can lift the loading handle upwards beyond
its rest position to help you remove the toast
(figure 2).
5. If the toast is not done enough it can be toasted
again. Turn the browning control to a lower
setting and watch the toast to ensure that it
doesn't burn.
6. Toasting can be stopped at any time by pressing
the cancel button.
If you are toasting a single slice of bread, set the
browning control to a lower setting than normal. By
using a lower setting when toasting a single slice of
bread, it will not be over toasted.
5
Advertisement
