Advertisement
Quick Links
Advertisement
Related Manuals for Inferno SRPH67
Summary of Contents for Inferno SRPH67
- Page 1 OUTDOOR Keep the instructions for future reference. This IM applies to both SRPH67 & SRPH69.
- Page 2 WARNING 1. For use outdoors or in amply ventilated WARNING: The use of this appliance in areas. enclosed areas can be dangerous and is 2. An amply ventilated area must have a mini- PROHIBITED. mum of 25% of the surface area open. WARNING: Read the instructions before 3.
- Page 3 Technical data Country Category Nominal heat Injector Gas & Pressure input(Hs) consumption diameter(Ø) 11kW 800 g/h(G30) 1.39mm G30 Butane and 3B/P(50) G31 Propane at 50mbar 11kW 800 g/h(G30) 1.67mm G30 Butane and 3B/P(30) G31 Propane at 30mbar 11kW 800 g/h (G30) 1.67mm Butane 3+(28-30/37)
- Page 4 Number of people required to assemble Assembly instructions One people Find a large, clean area to assemble your appliance. Please refer to the parts list and Time to assemble assembly diagram as necessary. Please use protective gloves when assem- bling this product. 10 minutes To avoid losing any small component or hardware, assemble your product on a hard...
- Page 5 Further information Important Notes: Connect LP Gas cylinder LPG cylinder not provided. The appliance is Before connecting, be sure that there is no designed to operate with a cylinder of size Ø debris caught in the head of the LP tank, 31.8 x 58 cm.
- Page 6 Leak testing (to be performed in a well- ventilated area) Your Outdoor Patio Heater has been checked for leaks at all the factory made connections. To check the connection of the gas hose/regulator/LPG cylinder. 1) Make leak test solution by mixing 1 part washing up liquid and 3 parts water.
- Page 7 Minimum clearance from combustible surfaces This heater is primarily used for the heating of outdoor patios, decks, spas, pools and open working areas. Combustible materials are considered to be wood, compressed parter, plant fibres, plas- tic or other materials that are capable of being ignited and burned.
- Page 8 LIGHTING PROCEDURE 1. Turn the control knob OFF. Slowly open 8. After lighting, turn knob from LOW to the gas cylinder valve. HIGH, position and back, to check flame 2. Push in and turn stability. control knob 9. In case of accidental break down of the anti-clockwise to flame (due to wind or other reasons), a IGNITE.
- Page 9 OPERATING PROCEDURE Shut down instructions: 1. Push in and turn control knob clockwise Note: The burner may be noisy when initially to OFF position. turned on, To eliminate excessive noise from 2. Turn LPG cylinder gas valve clockwise to the burner, turn the control knob to the LOW OFF position when heater is not in use.
-
Page 10: Cleaning And Maintenance
STORAGE Cleaning and maintenance Between uses: To enjoy years of outstanding performance ● Turn the control knob to OFF position. from your heater make sure you perform the ● Turn LPG cylinder to OFF position. following maintenance activities on a regular ●... - Page 11 TROUBLESHOOTING...
- Page 12 EXPLODED VIEW...
- Page 13 ASSEMBLY INSTRUCTIONS...
- Page 14 ASSEMBLY INSTRUCTIONS...
- Page 15 ASSEMBLY INSTRUCTIONS (not included)
- Page 16 ASSEMBLY INSTRUCTIONS...
Need help?
Do you have a question about the SRPH67 and is the answer not in the manual?
Questions and answers