Important Safety Instructions 1 )Read these instructions. 2 ) Keep these instructions. 3) Heed all warnings. 4 ) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, install in according with the instructions. 8) Do not install near any heat sources such as radiations, heat registers, stove, or other apparatus (including amplifiers) that produce heat.
Page 3
17) Attention should be drawn to the environmental aspects o battery disposal. 18) The use of apparatus in moderate climate. 19) The use of apparatus shall not exposed to dripping or slashing and tht no objects with liquids, such as vases, shall be placed on the apparatus. WARNING: To reduce the risk of the or electric shock, the device should not be expose drip and sprinkler.
Panel Panel 1. USB: Connect USB2.0 device 2. RS232: Connect to serial port 3. IR: Connect infrared remote receiver module 4. LNB IN: Used to connect the LNB to receive the signal 5. AV: This socket outputs composite video signal 6.
Installing the Batteries Remove the battery cover from the Remote Control and put 2Xaaa size batteries inside the compartment. The diagram inside the Battery Compartment shows the correct way to install the batteries. Connections Cautions: Make sure to check the voltage specification of the wall outlet is the same rating with the receiver.
Page 7
Multi Satellite Search: The ‘Multi Satellite Search’ can be chosen only when multiple satellites have been selected. FTA Only: Select Yes or No in this field. Yes: Only search FTA channels. No: Search FTA and encrypted channels. Scan Channel: Select TV+Radio, TV Channel or Radio Channel in this field.
System In the Main Menu, select System to enter the System menu which contains 8 submenu items: Language, AV Setting, Local Time Setting, Parental Lock, OSD Setting, Favorite and Other, Press the UP/DOWN key to select an option and press Right/Left to adjust the setting.
The image The signal is too weak Strengthen the signal stop suddenly or mosaic 11 Technical Specifications Item specification Frequency 950MHz to 2150MHz range Input 75Ohm unbalanced impedance Tuner Signal input -65~-25dBm level Symbol rate 2-45Mbps LNB power 13/18V,Max 350mA Demodulator QPSK/8PSK Demodulation...
Need help?
Do you have a question about the Smart 68 and is the answer not in the manual?
Questions and answers