Technical Specifications; Warranty - Microtemp Electrics AMT-300 Operation Manual

E. Probe is too close to the side and/or the bottom of the pot.
F. Haven't cleaned the probe before test.
G. Sample area is too dry.
H. The soil around the probe isn't even.
I. Soil or potting soil is tested too soon after re-potting.
J. There is houseplant fertilizer or tablet stick near the probe.
K. Damaged probe.
Handle with care and do not let the unit drop down.
●
Do not disassemble the unit to avoid failure.
●
Don't place the unit with the toolbox.
●
Avoid dust and water, which may stain the unit.
●
Do not store the unit above 50℃.
●
Clean the unit with soft fabric.
●
Remove the battery when not in use for an extended period of time.
●

TECHNICAL SPECIFICATIONS

Name
Type
Test objects
sunlight（9 levels）
Test moisture（5 levels） DRY+、DRY、NOR、WET、WET+
PH value（12 levels） 3.5～9.0
range
temperature
Power supply
Automatic off
Operating temperature
Main unit
Size
Test probe
Weight

WARRANTY

The product is warranted to be free from defects in materials and workmanship for
a period of one year from the date of purchase.
The warranty does not apply to the following conditions:
CAUTIONS CAUTIONS
CAUTIONS CAUTIONS
4 in 1 Soil Survey Instrument
AMT-300
Sunlight、 moisture、 PH value、 temperature
LOW-、LOW、LOW+、NOR-、NOR、NOR+、HGH-、HGH、HGH+
（display resolution 0.5）
-9℃～+50℃ (16℉～122℉)（display resolution 1℃/1℉）
One 9V block battery
The unit will be automatically off after 5 minutes disabling.
+5℃～+40℃
122mm×63mm×36mm
φ5mm×200mm
About 70.5 g (battery not included)
6