Advertisement
Quick Links
Advertisement
Related Manuals for Danacoid DY-700K
Summary of Contents for Danacoid DY-700K
- Page 1 Integrated Interface DY-700K Instruction Manual Danacoid International Pte Ltd. 1 / 7...
- Page 2 I. Product Appearance and Description Power indicator: The indicator of power supply, which becomes on when the device is electrified ‚ RUN indicator: The indicator of device running, which becomes on during signal transmission „ LAN indicator: The indicator of internet access, which becomes on when the cable is well-connected „...
- Page 3 † Audio interface: Transmit audio signal; LINE IN is the input interface that connects to the interface of signal source; LINE OUT is the output interface that connects to the interface of amplification equipment ‡ Dial Switch: Select the operating mode of the interface machine, dial IN and the interface machine becomes input interface machine;...
- Page 4 Support ultra-high-definition image or video base Integrated central control function, standardized programmable serial peripheral interface Support unlimited distribution of video streams Support preview and echo of real-time signal, WYSIWYG Support single-screen or multi-screen splicing and display, achieve accurate synchronous splicing, automated calibration, with a sync error below 0.1ms Support dual-network hardware backup Adopt embedded hardware, ensuring 7*24...
- Page 5 III. Product Specifications Product Model DM-700LK Input Mode 1-channel HDMI v1.4 input and 1-channel dual-track stereo input, 3.5mm audio jack, 1-channel HDMI ring-out Output Mode 1-channel HDMI v1.4 output and 1-channel dual-track stereo output, 3.5mm audio jack; USB: 2 USB interfaces, achieve KVM function Network 2 RJ45 interfaces, 1000Mbps...
- Page 6 IV. System Architecture 1) Confirm that there is DHCP server or router with DHCP functions in the network, so as to allocate legitimate IP addresses to all network devices in the system 2) Set the IP address of MICS server as static, such as 192.168.1.80, which will be beneficial to client login and IIS setting 3) Conduct system connection and construction in...
- Page 7 coding node to the exchange through Cat5e or Cat6 cable 6) All devices are electrified for operation 7 / 7...