Summary of Contents for e2-live iPower PS-30X
- Page 1 Home Automation iPower Smart Power Socket PS-30X Instruction Manual Edit by Shine Lo...
- Page 2 Manual tock switch ON/OFF Remote ON/OFF Power detection, checkup the actual power states (with scenario usage of RP-20) With RS-485 two way communication (control or inquiry) Accept e2-Live ALL OFF commands, can be set to enable or disable Edit by Shine Lo...
- Page 3 Home Automation Hardware All circuits can manual ON/OFF switch, with HA power detection of RP-20, please keep the status power Appearances on with blue LED extinguish) Used for two way control or inquiry communic ation via RS-485 3 circuits total loading are...
- Page 4 Home Automation Accessary Power line Note: Special specifications, please with this power line for ipower using in order to make sure correct operations. Edit by Shine Lo...
- Page 5 Home Automation Setting iPower Set up before using : ID & position of remote button Main function is to be controlled wirelessly by all kind of remote controller of e2-Live. General functions : For connected device, which does not need to know the status of power, or judge the function.
- Page 6 Home Automation Using the RC-07 remote control to set the first circuit of iPower Second District, No. 5 position, to accept the "All off" control set Setting stick or paper 1. Press the button and hold iPower first circuit (1) clip poke the tact 2.
- Page 7 Home Automation Link connect RP-20, when scenario is been executed, it will detect the power status of your appliances For appliances, used with RP-20 in scenario control, detect the real ON or OFF situation to ensure the accuracy of scenario performance..
- Page 8 Home Automation Plug in the device corresponding position, adjust to detect the right current consumption when power on and off. Appliances and iPower control location setting is complete and correct detection from the current adjustment, to make sure correct linking function be executed from RP-20..
- Page 9 Home Automation Plug in the above appliance and power on, blue LED extinguish Control Validation/ (圖一) Light & Curtain Accept all lights off function Not accept all lights off function (圖一) AMP Power → Zone 5 No.1 light TV Power →...
- Page 10 Home Automation STB Power → Zone 5 No.3 DVD Power → Zone 5 No.4 CD Power → Zone 5 No.5 CATV Power → Zone 5 No.6 AUX Power → Zone 5 No.7 iPower power status detection & RP-20 scenario editing setting In scenario edit setting graphic, for TV/CD/DVD/AMP/STB/CATV/A/C, all of these 7 appliances can select power current detectionfunction.
- Page 11 Home Automation Power current detection setting : Red LED light on : the device is power off Red LED light off : the device is power on Step 1 Step 2 Step 3 Step 4 Use flat head screw...
- Page 12 FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the iPower PS-30X and is the answer not in the manual?
Questions and answers