Page 2
About sfty Sense sfty Sense is a complete home safety unit. It is a smoke detector, which is always on - and a motion detector, that you can turn on and off. In addition, sfty Sense measures temperature and humidity. That’s a lot of things for a small battery-powered device to do - and it doesn’t end there.
Page 3
What’s in the box? Contents sfty Sense ● Remote control ● 4xAA 1.5V Energizer Lithium Batteries ● Velcro, wall fixing for remote control ● Screws, tools key ● Quick Guide ● Alarm sticker ● Installation requirements WiFi internet connection (2.4 Ghz) ●...
Before you start Make sure to download the sfty app from the Apple App Store or Google Play - and create an account. We realize not everyone enjoys reading manuals or guides, but if you are going to leave us to start the app and the installation wizard already - you might want to quickly check the “Ensure your success!”...
Page 5
From the main page of the app, tap Visit my.sfty.com/download to download the menu icon (top right corner) our app and register your account http://my.sfty.com/download Choose to install the sfty Sense and Tap Add new product follow the on screen wizard MESSAGES ADD NEW PRODUCT...
Page 6
Place the bracket on the ceiling using the glue pads, then mount it with the screws. You will not be able to place the Sense in the bracket without batteries. Remember to place the batteries in the right direction, look for the +/- in the battery compartment.
Page 7
PITCHED CEILING FLAT CEILING 1m or more from all walls 1m or more from the pitched ceilings top and from where it meets your wall...
Page 8
Home details and settings Clicking the name of your home in the app main screen takes you to home details See all your devices and their status All devices in your home are listed with their current status and a graph for temperature and air humidity.
Page 10
Motion alarm Sfty Sense can be used as a simple motion alarm - turned on or off with the sfty app. There are a couple of things you should know before you use this feature: You can turn it ON through the app from anywhere, but it’s not instant The first time you use the motion alarm, it will actually take up to 1 hour before you can consider your devices armed and ready to alert you of motion.
Page 11
Motion alarm ON ON from anywhere, using the app Up to 1 hour * *The first time you turn on the alarm by the app, it will take up to 1 hour before it’s However, this activation time drops to max 15 minutes alarm frequently.
Page 12
Motion alarm OFF OFF from anywhere, using the app 60 sec countdown Turns OFF in a If you enter your seconds home while your even if it has motion alarm is ON, already been triggered your devices will emit gentle beeps for 60 seconds while counting down to a full alarm.
Page 13
During a smoke alarm Local siren, app alarm and SMS warnings If any sfty Sense device detects high levels of smoke, all your devices will start their siren. In addition, any user you have added to your home with the “receive fire alarms”...
Page 14
Hold the test / mute button in for 1-2 seconds to perform a test Doing this will make the device (and any other sfty Sense device in your home) perform a short alarm sound test. Users added to your home with the...
Page 15
Test / Mute button light signals Device started / rebooted When the 4th battery is inserted (either the first time you insert them or after removing one and reinserting it), the test/mute button will flash blue and red once to indicate that the device is booting up.
Alive After you have installed the device, the light in the motion sensor will gently blink green every 30 seconds to show you that your sfty Sense is alive. To avoid being an annoying distraction in a dark room, we have set this light to of low strength and it can be hard to spot in a well lit room.
Note: Never use detergents or solvents (like glass cleaner) on your sfty Sense. Do not spray air fresheners, hair spray or other aerosols near it. Do not get water inside the alarm or paint over it. Testing your device Test your sfty Sense once a month by pressing and holding in the Test button.
Changing the batteries Change batteries every December 1st This is the month when most fires occur! If your sfty Sense starts to beep once every three hour, or if you receive messages about critically low battery in your sfty app, the batteries need to be replaced immediately.
Page 19
Address: Lilleakerveien 8 0208 Oslo Norway Telephone number: (+47) 40007389 Homepage: www.sfty.com DoP: Sense-2015-001-EN 1134 Contact us If you need more information or support, you can contact us through our web page www.sfty.com/support or send us an email at support@sfty.com...
Need help?
Do you have a question about the Sense and is the answer not in the manual?
Questions and answers